00193351-06_RI_Vacuum_pump_de en.pdf - 第45页
SIPLACE HS-50/HS-60/D4/S-25HM/S-27HM/HF -Series 2 Retrofit instructions for vacuum pump 07/2011 Edition 43 : Plug the LAN cable back in after the new unit has been fitted. : Loosen the screws. : Lift the blo ck to a poin…
2 Retrofit instructions for vacuum pump SIPLACE HS-50/HS-60/D4/S-25HM/S-27HM/HF-Series
07/2011 Edition
42
Mount the pneumatic hoses 2
: Loosen the red security screw on the control unit.
2
2
: Unplug the LAN cable.
: Pull the control unit out.
: Lift the control unit and put it to one side to allow the new PUN8 hoses to be pulled through to
the distributor block(s).
2
2
2
SIPLACE HS-50/HS-60/D4/S-25HM/S-27HM/HF-Series 2 Retrofit instructions for vacuum pump
07/2011 Edition
43
: Plug the LAN cable back in after the new unit has been fitted.
: Loosen the screws.
: Lift the block to a point where the right connection can be achieved.
: Mark the hoses.
: Connect the newly installed PUN 8 hose.
: Reassemble the block.
2
2
2
Distributor block
Screws
Vacuum hoses
Compressed air hose
Vacuum
(existing hoses
Vacuum (existing hoses)
Compressed air
(newly mounted hose)
2 Retrofit instructions for vacuum pump SIPLACE HS-50/HS-60/D4/S-25HM/S-27HM/HF-Series
07/2011 Edition
44
2
2
: Change the vacuum generator with the one for vacuum pump.
2
Layout of hoses S-27 HM 2
2
Mind the right layout of the hoses! 2
2
2
2
Blind plug
Y joint for hoses 1 and 2