00198532-01_SM_MeasurementFeeder_EN.pdf - 第15页

2 Replacing spare parts 2.4 Side cover left Service Manual SIPLACE MeasurementFeeder X 02/2020 15 2.4.1 Removing the side cover ► Carefully place the feeder module with the right side down on a stable, level and clean su…

100%1 / 30
2 Replacing spare parts
2.4 Side cover left
14 Service Manual SIPLACE MeasurementFeeder X 02/2020
2.4 Side cover left
NOTICE
Avoiding damaging the board
To avoid damaging the threaded bolts on the printed circuit board, only remove the side
cover if the other side cover has been fully fitted i.e. with all screws.
Fig.3: Side cover left
Feeder module Item no. Designation
MeasurementFeederX 03153782-xx Side cover left
03010209-xx
03033796-xx
03045178-xx
A
B
C
Screws:
7045 M2.5X6 (Phillips screw)
SN 2.5X6 (TORX screw)
ISO7380 M2X2.5 (Allen screw)
Required tools
●
Phillips screwdriver 0.9 Nm
●
TORX screwdriver 0.6 Nm, size T8
●
Allen key, size M2
2 Replacing spare parts
2.4 Side cover left
Service Manual SIPLACE MeasurementFeeder X 02/2020 15
2.4.1 Removing the side cover
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Loosen the screws as shown in the diagram.
For the screws marked with A you need a Phillips
screwdriver.
For the screws marked with B you need a TORX
screwdriver.
► Pull the side cover down and out.
► Loosen the screws as shown in the diagram.
For the screws marked with B you need a TORX
screwdriver.
For the screws marked with C you need an Allen key.
► Remove the side cover.
2 Replacing spare parts
2.4 Side cover left
16 Service Manual SIPLACE MeasurementFeeder X 02/2020
2.4.2 Fitting the side plate
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Place the side cover on the feeder as shown.
► Fasten the screws as shown in the diagram.
For the screws marked with C (ISO7380M2X2.5,
03045178-xx) you need an Allen key.
For the screws marked with B (SN2.5X6, 03033796-
xx) you need a TORX screwdriver.
► Fasten the screws as shown in the diagram.
For the screws marked with B (SN2.5X6, 03033796-
xx) you need a TORX screwdriver.
For the screws marked with A (7045M2.5X6,
0310209-xx) you need a Phillips screwdriver.