1OM-1505-004_w.pdf - 第130页

1OM-1505 1. Outline of Program Change Operation : Chap.4 4-1 1. Outline of Program Change Operation Follow the steps below to perform a program change operation. Preparation for Program 2.1 Preparation of PCB Backup Jig …

100%1 / 217
1OM-1505
0906-001 4-B
1OM-1505
1. Outline of Program Change Operation : Chap.4
4-1
1. Outline of Program Change Operation
Follow the steps below to perform a program change operation.
Preparation for Program 2.1 Preparation of PCB Backup Jig or PCB
Change Operation Vacuum Jig
2.2 Stencil Preparation
2.3 Creation of Pattern Program for Production
Model
2.4 Registration of Pattern Program for Production
Model
Program Change Operation 3.1 Selection of Run Mode
3.2 Selection of Production Model
3.3 SETUP
3.4 Backup Pin Adjustment and PCB Backup Jig or
PCB Vacuum Jig Installation
3.4.1 In the case that the Backup Pins are used
3.4.2 I n the case that the PCB Backup Jig or PCB
Vacuum Jig is used
3.4.3 In the case that other jig is used
3.5 PEC Recognition Test
3.6 2Camera AUTO Calibration
3.7 Squeegee Attachment
3.8 Stencil Attachment
3.9 Stencil Recognition Test
3.10 Stencil Recognition
3.11 Inaccurate Position Correction
3.12 Solder Paste Replenishment
3.13 Paste Kneding
Test Print and 4.1 Test Print
Automatic Operation 4.2 Automatic Operation
F1D1
1002-002
1OM-1505
4-2
2. Preparation for Program Change Operation: Chap.4
2. Preparation for Program Change Operation
2.1 Preparation of PCB Backup Jig or PCB Vacuum Jig
Create the PCB backup jig or PCB vacuum jig required for the PCB production
referring to "Chapter 5 Basic Information" and Chapter 6.1 Specications of
Backup Jig Making.
Note
When the backup pins are used, the above is not required.
2.2 Stencil Preparation
Create the stencil for printing required for the PCB production, referring to
"Chapter 5 Basic Information".
2.3 Creation of Pattern Program for Production Model
A pattern program is required for the automatic operation of the machine.
Reference
Refer to "Chapter 2 Pattern Program" in "Volume 2: Programming and Machine
Data" for details.
2.4 Registration of Pattern Program for Production Model
Transmit the pattern program data from the network terminal (option) to the
machine.
1002-002