wire-bonder.pdf - 第100页

WEST•BOND MODEL 454647E SER IES INSTRUCTION MANUAL 94 ADVANCED PROGRAMMING Y-Offset This is the distance between the first and second b ond in motor steps. Y OFFSET before Bond #1: Always 0 5=Info 9=Next bond A=Prev opti…

100%1 / 126
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
93
ADVANCED PROGRAMMING
Loop Elevation
The highest point the tool reaches in the looping procedure. It is important to remember that this
maximum tool height does not equate to loop height. As the tool begins it descent toward the work
surface, this high point of the wire will be pulled down with the tool. Wire loop height is dependant upon
many factors other than just L
OOP ELEVATION (contributing factors: Z-BEFORE-Y, BACKBEND, Y-OFFSET,
LOOP ELEVATION, NUDGE-UP, wire size, wire strength, wire material, bonding tool, clamp position, etc.).
LOOP ELEV before Bond #1: n/a
5=Info
9=Next bond
A=Prev option G=Next option
Notice there is no Loop Elevation setting
available before the first bond. This height is
reached directly before the second bond is
made.
LOOP ELEV before Bond #2: 100 steps
4=Key in 5=Up (0.02083”)
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Down G=Next option
ϑ To call “Loop Elevation”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), and then
press 7 (L
OOP ELEVATION).
Key Format:
Escape
1
Go To
Device
2
Home
3
Key In
4
Up
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Down
0
Next
Option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
94
ADVANCED PROGRAMMING
Y-Offset
This is the distance between the first and second bond in motor steps.
Y OFFSET before Bond #1: Always 0
5=Info
9=Next bond
A=Prev option G=Next option
Y OFFSET before Bond #2: 120 from Bond 1
4=Key in 5=Increase (0.02500”)
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Decrease G=Next option
ϑ To call “Y-Offset”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), and then
press 8 (Y-O
FFSET).
Key Format:
Escape
1
Go To
Device
2
Home
3
Key In
4
Increase
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Decrease
0
Next
Option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
95
ADVANCED PROGRAMMING
Close Clamp at Loop Height
The operator can set up the machine’s loop shape in one of two ways. From the main EDIT LOOP MENU
key G can be pressed and the machine will walk the operator through all of the loop shape settings. Or, if
key 4 is selected, the user can modify each setting individually.
4500E
ONLY
Close CLAMP AT LOOP HT ABOVE Bond #1: n/a
5=Info
9=Next bond
A=Prev option G=Next option
Close CLAMP AT LOOP HT ABOVE Bond #2:
4=Key in 5=Close
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Open G=Next option
ϑ To call “Close Clamp at Loop Height”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), and then
press 9 (C
LOSE MODE).
Key Format:
Escape
1
Go To
Device
2
Home
3
4
Close
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Open
0
Next
Option
G