wire-bonder.pdf - 第103页

WEST•BOND MODEL 454647E SER IES INSTRUCTION MANUAL 97 ADVANCED PROGRAMMING Loop Pull This option “cuts” a 45° a ngle from the loop height to the work surface. This feature works to lower the loop height. (5 steps = 1mil)…

100%1 / 126
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
96
ADVANCED PROGRAMMING
Close Clamp at Search
The operator can set up the machine’s loop shape in one of two ways. From the main EDIT LOOP MENU
key G can be pressed and the machine will walk the operator through all of the loop shape settings. Or, if
key 4 is selected, the user can modify each setting individually.
4500E
ONLY
Close CLAMP AT SEARCH ABOVE Bond #1: n/a
5=Info
9=Next bond
A=Prev option G=Next option
Close CLAMP AT SEARCH ABOVE Bond #2:
4=Key in 5=Close
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Open G=Next option
ϑ To call “Close Clamp at Search”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), 9 (CLOSE
MODE), and then press G (NEXT OPTION).
Key Format:
Escape
1
Go To
Device
2
Home
3
4
Close
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Open
0
Next
Option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
97
ADVANCED PROGRAMMING
Loop Pull
This option “cuts” a 45° angle from the loop height to the work surface. This feature works to lower the
loop height. (5 steps = 1mil)
LOOP PULL before Bond #1: n/a
5=Info
9=Next bond
A=Prev option G=Next option
LOOP PULL before Bond #2: 0 Y step
4=Key in 5=Increase (0.00000”)
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Decrease G=OK
ϑ To call “Loop Pull”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), and then
press 0 (LOOP PULL).
Key Format:
Escape
1
Go To
Device
2
Home
3
Key In
4
Increase
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Decrease
0
Next
Option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
98
ADVANCED PROGRAMMING
Nudge Up
This option is used to increase loop height. Just before making the second bond, the machine can be set to “walk”
back toward the first bond while at search above the second bond. This effectively nudges up the loop height. To
work effectively, the search above second bond should be set fairly low to the work.
NUDGE-UP before Bond #2: 0 Y step
4=Key in 5=Increase (0.00000”)
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Decrease G=OK
ϑ To call “Nudge-Up”
From the H
OME menu press 4 (EDIT), 0 (EDIT LOOP MOTION), 4 (LOOP EDIT), and then
press G (NUDGE-UP).
Key Format:
Escape
1
Go To
Device
2
Home
3
Key In
4
Increase
5
6
Previous
Bond
7
Suggest
8
Next
Bond
9
Previous
Option
A
Decrease
0
Next
Option
G