00194440-10_SM_X-Series_Customer_en.pdf - 第98页

Service Work Gantries 3.3.8 Replacing the Trailing Cable 98 Service Manual SIPLACE X Series 3.3.8.3 3 . 3 . 8 . 3 O v e r v ie w o f S I P L A C E X 4 I / X S e r ie s V a r ia n t s Overview of SIPLACE X4I/X Series Vari…

100%1 / 384
Service Work
3.3.8 Replacing the Trailing Cable Gantries
Service Manual SIPLACE X Series 97
3.3.8
3.3.8 Replacing the Trailing Cable
Replacing the Trailing Cable
3.3.8.1
3.3.8.1 Introduction
Introduction
This manual describes the installation and removal of the trailing cable for Siplace HF and X-Series ma-
chines in their various versions.
This manual sometimes uses diagrams of the SIPLACE HF machine. However, this does not affect the
installation and removal for X series machines. If there are differences between the two machines types,
which need to be observed, this will be indicated on the diagrams.
3.3.8.2
3.3.8.2 Overview of SIPLACE HF Variants
Overview of SIPLACE HF Variants
Trailing cable HF
Depending on the arrangement of gantries, there are three different trailing cable types available for
SIPLACE HF machines.
▪ Trailing cable for HF machines at gantry 1 in a placement area with one gantry
HF gantry 1 or 3, HF3 gantry 3
– [03039706S01] Trailing cable analog 1P
▪ Trailing cable for HF machines in a placement area with two gantries and an uneven number
HF3 gantry 1
– [03039708S01] Trailing cable analog 2P U
▪ Trailing cable for HF machines in a placement area with two gantries and an even number:
HF3 Portal 4
– [03039709S01] Trailing cable analog 2P G
NOTICE
Downwards compatibility
These versions of the trailing cable can also be used with SIPLACE HF machines up to ma-
chine number A-219, in conjunction with the "Trailing cable retrofit kit" [03046248-01]. This ret-
rofit kit is included in the trailing cable spare parts set.
► Fit the new cable supports.
Service Work
Gantries 3.3.8 Replacing the Trailing Cable
98 Service Manual SIPLACE X Series
3.3.8.3
3.3.8.3 Overview of SIPLACE X4I/X Series Variants
Overview of SIPLACE X4I/X Series Variants
X series trailing cable up to machine serial number B-078
Depending on the arrangement of gantries, there are three different trailing cable types available for
SIPLACE X series machines.
▪ Trailing cable for X series machines in a placement area with one gantry:
X2 gantry 1/3, X3 gantry 3
– [03015419-03] Trailing cable digital 1P
▪ Trailing cable for X series machines in a placement area with two gantries and an uneven number:
X3 gantry 1 and X4 gantry 1/3
– [03002306-03] Trailing cable digital 2P U
▪ Trailing cable for X series machines in a placement area with two gantries and an even number:
X3 gantry 4 and X4 gantry 2/4
– [03003199-03] Trailing cable digital 2P G
IGUS trailing cable for X4I/X series version 1 from machine serial number B-079
Depending on the arrangement of gantries, there are three different trailing cable types available for
SIPLACE X series machines.
▪ Trailing cable for X series machines with one gantry:
X2 gantry 1/3, X3 gantry 3
– [03022236S02] Trailing cable digital 1P
▪ Trailing cable for X series machines in a placement area with two gantries and an uneven number:
X3 gantry 1 and X4 gantry 3
– [03022237S02] Trailing cable digital 2P U
▪ Trailing cable for X series machines in a placement area with two gantries and an even number:
X3 gantry 4 and X4 gantry 2/4
– [03021065S02] Trailing cable digital 2P G
CAUTION
Conversion to a new trailing cable
Some of the machines up to number B-078 have been converted to accommodate the new trail-
ing cable from number B-079.
► Before ordering the trailing cable, please compare the item numbers on your current ma-
chine.
► The conversion of a customer machine involves significant costs and is only possible at the
SIPLACE headquarters.
NOTICE
No downwards compatibility
These versions of the trailing cable can not be used with SIPLACE X series machines up to
machine number B-078
Service Work
3.3.8 Replacing the Trailing Cable Gantries
Service Manual SIPLACE X Series 99
IGUS trailing cable for X4I/X series version 2 after machine serial number B-079
Depending on the arrangement of gantries, the following trailing cable types are available for SIPLACE
X series machines.
▪ Trailing cable for X series machines with one gantry:
X2 gantry 1/3, X3 gantry 3
– [03050655Sxx] Trailing cable digital 1P
▪ Trailing cable for X series and X4I machines in a placement area with two gantries and an uneven
number:
X3 gantry 1 and X4/X4I gantry 1/3
– [03050817-xx] Trailing cable SIPLACE X series 2P U
▪ Trailing cable for X series machines in a placement area with two gantries and an even number:
X3 gantry 4 and X4 gantry 2/4
– [03050934Sxx] Trailing cable digital 2P G
▪ Trailing cable for X4I machines in a placement area with two gantries and an even number (rotated
gantry):
X4I gantry 2/4
– For SIPLACE X4I only: [03051596-01] Trailing cable SIPLACE X4i 2P G
3.3.8.4
3.3.8.4 Handling the Hose Unlocking Tool [03047090-xx]
Handling the Hose Unlocking Tool [03047090-xx]
Due to the poor access to the pneumatic distributor, we recommend using an unlocking tool.
With the help of the hose unlocking tool [03047090-xx] you can open the unlocking ring (blue here) for
the compressed air connection. This enables you to remove both the hoses and the dummy plugs This
enables you to remove both the hoses and the dummy plugs (additional tool included in set).
NOTICE
Backwards compatibility
This version of the trailing cable is only backwards compatible if you also replace the hotlink
card [03054633-01] and the Vision board spread spectrum [03054634-01] and then only with
versions from B-079 up to now. Machines before B-079 can not be upgraded.
From version B-1071 onwards the hotlink card and the Vision board spread spectrum are no
longer necessary.
► Use the pipe-shaped tool (1) to open the unlocking
ring.
► Carefully pull the hose out of the compressed air con-
nection. The diagram shows the removal of a dum-
my plug (2), not a hose.