00194610-01.pdf - 第21页
Retrofit instructions: Modification of the nozzle changer power supply for the DLM placement heads, HF series 07/2005 Edition 21 : Unplug the CAN bus connector from the one-wire h ub. 2 2 : Remove the two studs from the …
Retrofit instructions: Modification of the nozzle changer power supply for the DLM placement heads, HF series
07/2005 Edition
20
2.4 Converting the power supply
: Dock the component trolley out of its location.
: Switch the placement machine off at the main switch.
2
: Unscrew the two bolts, otherwise the connector cannot be plugged in correctly.
2
2
2
2
2
2
2
2
2
2
2
2
2 bolts
Retrofit instructions: Modification of the nozzle changer power supply for the DLM placement heads, HF series
07/2005 Edition
21
: Unplug the CAN bus connector from the one-wire hub.
2
2
: Remove the two studs from the one-wire hub.
2
2
2
2
2
2
2
2
2
2
One-wire hub
CAN bus connector
Retrofit instructions: Modification of the nozzle changer power supply for the DLM placement heads, HF series
07/2005 Edition
22
: Plug in the distributor cables as follows:
2
2
: Screw the CAN bus connector to the adapter.
2
2
2
2
2
2
2
Connect to one-wire hub
W1: Connect to CAN bus cable
W2: Connect to cable pulled
out towards the machine frame
Connectors