00191474-02.pdf - 第28页

Siemens AG 1999 All rights reserved Technische Än derunge n vorbeha lten Artikel-Nr.: 0 019147 4-02 Siemens Aktienges ells chaft Bestellung an : Siem ens AG , PL EA 1 V MC Rupert-May er-Strasse 44 D-81359 Muenc hen Print…

Cable mounting plate on the head board Retrofit instructions HS -50

11/99 edition

ATTENTION 7

Before attaching the head processor board, check that 7

- none of the pins on the head board (item 2 in Fig. 7 - 1) are bent

- the plugs of the head processor board are seated correctly on the rows of pins on the head

board. 7

Å Carefully press the head processor board against the head board until the plugs of the head

processor board come to rest against the head board.

Å Use the M3 washers (item 4) and M3 nuts (item 5) to fix the head processor board at positions

I/III and IV.

Å Use the M3 washer (item 4) and M3x5 fillister head screw (item 6) to fix the head processor

board at position II.

Å Secure all the screws and nuts with Loctite 243.

Å Attach all the cables once more.

Å Remove the protective paper from the adhesive tapes (items 2, 3, 5 and 6 in Fig. 1 - 1) and

carefully press the ribbon cable against the adhesive tapes.

CAUTION 7

Use your index finger and press the ribbon cable only lightly against the adhesive surfaces.

Otherwise you may break the cable, which would cause faults in the revolver head. 7

Å Snap the black dp motor cable onto the round cable holder (item 4 in Fig. 1 - 1).

8 Function test

Å Remove all tools and other parts from the placement system.

Å Close the protective covers.

Å Start the placement system and watch the reference run.

Artikel-Nr.: 00191474-02 Siemens Aktiengesellschaft

Bestellung an:

Siemens AG,

PL EA 1 V MC

Rupert-Mayer-Strasse 44

D-81359 Muenchen

Printed in the Federal Republic of Germany

Order no.: 00191474-02 Siemens Aktiengesellschaft

To be ordered from:

Siemens AG,

PL EA 1 V MC

Rupert-Mayer-Strasse 44

D-81359 Muenchen

Printed in the Federal Republic of Germany