00194547-03.pdf - 第32页
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005 32 of 82 → Switch the machine off when the station computer has shut down. → Switch the machine back on again. This reboots both the station compute…
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
31 of 82
Finalizing the installation
Note:
The status only lists the programs that have just been installed. If, for instance, the current
version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
→ If you wish to read the log of the installation of any program, click the Ok (or Error) button next
to the name of the program. The Notepad is started and displays the appropriate file.
Fig. 4-14: Final dialog of the installation
→ Click the Finish button.
Note:
To establish the connection between the station computer and the machine controller after
installation has been completed the station computer must first be run down and the
machine must then be switched off completely.
→ To do this, click Shut Down in the Start menu and select Shut Down from the dropdown list
followed by the OK button.
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
32 of 82
→ Switch the machine off when the station computer has shut down.
→ Switch the machine back on again. This reboots both the station computer and the machine
controller.
4.3 Uninstalling the SIPLACE software
If it is necessary to uninstall the SIPLACE software, this must be done in one of the ways described
below.
→ Open the Start menu and select Programs Æ Siplace Æ Siplace Uninstall.
Fig. 4-15: Starting uninstallation (alternative 1)
Installation Manual Station Software Version 601.02 SP1 Edition 10/2005
33 of 82
Or:
→ Open the Start menu and select Settings Æ Control panel.
→ Double-click Software.
Fig. 4-16: Starting uninstallation (alternative 2)
→ Select Siplace from the list of installed programs.
→ Click the Change/Remove button.