4Q4CEIM.pdf - 第10页
Page 2 SAFETY PRECAUTIONS Be sure to observe 4Q4C-E-IMA00-A03-00 POWER AND AIR SOURCES SHOULD BE CONNECTED A T THE LAST OF IN- ST ALLING OPERA- TION. If they are connected earlier , you may get an electric shock or injur…
Page 1
SAFETY PRECAUTIONS
Be sure to observe
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to the failure to read an
indication is classified and described as follows.
The matters should be observed are classified and described according to the symbols
shown below.
(The followings are only some examples of the symbolic indications.)
This indication refers to a situation which is considered that
there is a possibility of death or serious injury.
These symbols indicate matters to which attention must be paid.
This symbol indicates an action that must not be carried out.
WARNING
This symbol indicates an action that must be carried out.
4Q4C-E-IMA00-A03-00
Page 2
SAFETY PRECAUTIONS
Be sure to observe
4Q4C-E-IMA00-A03-00
POWER AND AIR
SOURCES SHOULD
BE CONNECTED AT
THE LAST OF IN-
STALLING OPERA-
TION.
If they are connected earlier,
you may get an electric shock
or injured.
M92E
WARNING
FIRMLY INSERT THE
POWER AND OTHER
PLUGS.
Imperfect plugging in may
cause fire because of electric
shock and generated heat.
Do not use the damaged
plug or loose outlet.
M87E
USE THE SPECIAL-
IZED OUTLET AND
BREAKER EXCLU-
SIVELY.
If the breaker is shared be-
tween machines, it may cause
fire because of generated heat.
Check the dissipation
power in your Standard
Specification before consult-
ing an electrical contractor.
M89EB
M06E
GROUND THE MA-
CHINE PROPERLY.
There is a risk of an electric
shock or leak.
Consult a professional
electrical contractor.
PERIODICALLY REMOVE DUST
FROM POWER PLUG.
Dust on the plug may result in fire caused by
defective insulation because of moisture.
Pull out the power plug and wipe off dirt with
dry cloth.
If the machine is not going to be used for a
long period, turn off the breaker connected with
the machine.
M86E
DO NOT DAMAGE POWER AND
OTHER CORDS OR PLUGS.
Damaged cord and plug may cause electric shock,
short circuit or fire.
Hold the plug when plugging in or unplug-
ging.
Cord and plug repairs should be attempted
only by the person competent to do the electrical
work, or contact the manufacturer.
M85E
Never damage, remake, bring
close to heating appliances, bend
forcibly, twist, pull, put heavy
objects on, and bundle up.
M88EB
DO NOT INSERT OR
REMOVE POWER AND
OTHER PLUGS BY
WET HAND.
If plugged in or unplugged by
wet hand, it may result in
electric shock.
4
Page 3
SERIAL PLATE
The serial plate attached to this machine indicates the model name and production number.
4Q4C-E-IMA00-A03-05
CM201-DU
CM202-DU
CM201-902E
Actual numbers are shown on the plate instead of ∗.
CM201-DU
KXF-4R4C
This is attached to the left on the rear side of machine.
4Q4C-902E
CM202-DHU
4U4C-902EU
Actual numbers are shown on the plate instead of ∗.
CM202-DU
KXF-4Q4C
Actual numbers are shown on the plate instead of ∗.
CM202-DHU
KXF-D24C