00196678-0102_RI_CAN-Knoten_X-Serie70x_De+EN.pdf - 第52页

Installation Running the CAN Nodes Option Cable 52 Retrofit Instructions CAN Node X Series SW70x 6-10: Connecting cable "Power CAN nodes NC/T C [03047464-xx]" at location coding +24V supply (cabl e W3 connector…

Installation

Running the CAN Nodes Option Cable

Retrofit Instructions CAN Node X Series SW70x

6-9: Circuit diagram for 1 wire hub module [03041473-xx]

6-8: Removing the 1 wire hub module [03041473-xx]

X Remove the 1 wire hub if still present and

connect the new cables to the options fitted.

See also Reject bin query SIPLACE X series /

D3, issue 11/2006 [00194716-02]. or Assem-

bly instructions for nozzle changer CPP/

C&P20A (from SW 702) SIPLACE X series, is-

sue 06/2009 [00196432-01]

(1) Patch cable [03041326-xx] to 1 wire distributor

[03040219-xx]

(2) 1 wire hub module [03041473-xx]

(3) Cable to nozzle changer (4) Cable for component reject bin query

Installation

Running the CAN Nodes Option Cable

52 Retrofit Instructions CAN Node X Series SW70x

6-10: Connecting cable "Power CAN nodes NC/TC [03047464-xx]" at

location coding +24V supply (cable W3 connector designation X3*p

[03019056-xx]).

X Run the "Power CAN nodes NC/TC

[03047464-xx]" cable along the cable tree to

the X3*P connector and fix in place with cable

ties. This X3*P connector is part of the "X

series /feed-in device FCU signaling

[03019056-03]" cable on the component

trolley feed-in device cable tree. (See also the

circuit diagram).

6-11: Cable routing for CAN nodes to back of component trolley feed-in

device

Installation

Running the CAN Nodes Option Cable

Retrofit Instructions CAN Node X Series SW70x