00194798-01.pdf - 第28页
Installation Manual, Station Software Version 602.01 Edition 06/2006 4.3.1.3 Calibrating the touchscreen for the D-Series → Select Start Æ Program Files Æ PenMount Utilities Æ PenMount Control Panel to start the touchscr…
Installation Manual, Station Software Version 602.01 Edition 06/2006
27 of 60
→ Keep your finger on the calibration icon until the "Touch Enabled" message appears. A second
calibration icon now appears.
→ Repeat the steps described above for the second calibration icon.
A dialog box then appears asking you to test the calibration. You can carry out the calibration again if
you are not sure that you have carried it out correctly the first time.
→ Carry out the procedure described above for the second screen as well.
→ Click the Close button to close the program.
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.3.1.3 Calibrating the touchscreen for the D-Series
→ Select Start Æ Program Files Æ PenMount Utilities Æ PenMount Control Panel to start the
touchscreen calibration applet.
Fig. 4-9: PenMount Control Panel
→ Open the Multiple Monitors tab.
Fig. 4-10: PenMount Control Panel – Multiple Monitors tab
28 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
→ Check the Multiple Monitor Support box.
→ Click the Map Touch Screens button.
The “Mapping” dialog box opens.
Fig. 4-11: PenMount Control Panel – "Mapping" dialog box
→ Acknowledge the “Mapping” dialog box by clicking on OK.
→ Touch the monitor showing Please touch this monitor with your finger.
Fig. 4-12: Mapping the touchscreens
The touchscreens are now mapped and the PenMount Control Panel is displayed again.
29 of 60