00194798-01.pdf - 第45页
Installation Manual, Station Software Version 602.01 Edition 06/2006 4.6 Inst alling the machine contro ller on a CPU076 (SIPLACE X-series) 4.6.1 Installing the RMOS machine controller operating system 4.6.1.1 Creating t…
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.5 Machine files
There are 2 databases in Version 602 of the software, MA-Daten.mdb and MA-Achsen.mdb.
Machine-related configuration, measurement and parameter data is stored in *.XML and *.MA files.
The MA-Daten.mdb database contains all standard data except the standard data for the axes. This data is
stored in the MA-Achsen.mdb database.
Note:
All machine data and the database (see machine data database feature) must be of
revision level 70 (version 70.602.01). Current machine data must
not be replaced by
revision levels of an earlier version, either completely or partially, e.g. revision level 60
(version 60.601.03).
44 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.6 Installing the machine controller on a CPU076 (SIPLACE X-series)
4.6.1 Installing the RMOS machine controller operating system
4.6.1.1 Creating the installation floppies
The two floppies for the machine controller operating system can be created on any Windows XP
computer equipped with a CD drive and a floppy drive. An image in the form of a self-extracting EXE file is
stored in the folder "RMOS_Images" of the CD with the Version 602.01 software for both of the installation
floppies. The numbers at the end of the file names (Rmos-1.exe, Rmos-2.exe) correspond to the
sequential number of the relevant floppy. You can create the floppies in any sequence.
→ Insert the CD for version 602.01 of the software in the CD ROM drive.
→ Insert a formatted floppy (3.5", 1.44MB) into the floppy drive.
→ In the Windows Explorer, open the "RMOS_Images" folder on the CD.
→ Start the appropriate EXE file by double clicking it.
→ Follow the program instructions:
Insert the floppy. You may be asked whether the floppy can be deleted.
The floppy is written (the bar shows the progress).
→ When the window disappears, the floppy is finished (before removing the floppy, you must wait until the
'active' light on the disk drive has gone out).
Notes:
- The system looks for a floppy in drive 'A': The floppy must therefore already be in the drive at the start
(this setting cannot be changed).
- You must use a formatted floppy.
(The program does not allow you to format the floppy as you create it.)
- Each time the EXE file is called it will create a single floppy.
- Before and during creation of each disk, no other tool may be permitted to access this floppy (e.g. the
current Explorer window, the path of a DOS box must not be set to the A: drive).
45 of 60
Installation Manual, Station Software Version 602.01 Edition 06/2006
4.6.1.2 Installation procedure
→ Insert the "Rmos-1" floppy in the drive of the MC and switch the station on.
→ The following message will appear on screen
Starting MS-DOS...
DO YOU WANT TO CONTINUE INSTALLATION ?
[C] CONTINUE [R] REBOOT SYSTEM TO CHECK OR CHANGE SETUP
[T] TERMINATE BATCH PROCESS (Change to DOS)
PRESS KEY TO CONTINUE [C,R,T]
'C' continues the installation.
Note:
If the error message "INVALID MEDIA TYPE" appears, you must respond with
(f)ail (this occurs several times; generally when formatting new hard disks);
installation is then continued.
You can abort installation at this point by typing 'T'.
→ The installation program starts.
→ Press any key to continue or cancel with <Esc>.
The software version and the machine type are displayed.
→ Press any key to continue or cancel with <Esc>.
The main menu appears:
>>>
>>>
------------------
Install Revision of SIPLACE Operating System
------------------Terminate SIPLACE Installation Program
Main Menue of SIPLACE Installation MCRM3 40x.xx
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
Note:
If a submenu or a function in the installation program is selected, the cursor
flashes gray.
→ Select the function "Install Revision of SIPLACE Operating System" and confirm with <RETURN>.
46 of 60