00196778-02_VB Setup Center 4.2_DE_EN.pdf - 第44页
New Functions in Setup Center 4.2 Enable Feeder type Exchange 44 Setup Center 4.2 Setup Center 4.2
New Functions in Setup Center 4.2
Enable Feeder type Exchange
Setup Center 4.2 Setup Center 4.2 43
5.8 Enable Feeder type Exchange
Purpose
It is possible to interchange the 12 mm X feeder type with the factory-optimized 12 mm X (without LCD
display) and the 16mm X feeder type with the factory-optimized 16mm X (without LCD display) without
changing the setup in SIPLACE. The machine is able to start the pick up immediately after a feeder type
changeover.
New Functions in Setup Center 4.2
Enable Feeder type Exchange
44 Setup Center 4.2 Setup Center 4.2
Restrictions
SIPLACE Pro Restriction
Setup Center 4.2 Setup Center 4.2 45
6 Restrictions
6.1 Restriction
6.1.1 SIPLACE Pro
▪ The following SIPLACE Pro versions are not supported any longer:
– SIPLACE Pro 3.2
– SIPLACE Pro 4.1
6.1.2 Station Software
▪ The following station software versions are not supported any longer:
– 604.xx
6.1.3 Database Views
▪ The following Setup Center database views are not supported any longer:
– v_PackagingUnitInSetup_Short
– v_PackagingUnitInSetup
– v_PackagingUnitInSetup2
– v_PackagingUnitInSetup3
– v_PackagingUnit
– v_PackagingUnit2
– v_PackagingUnit3
– v_PackagingUnit4
– v_PackagingUnit5
– v_PackagingUnitInUse
– v_PackagingUnitInUse2
– v_TableInventory
– v_VerificationHistory
A part of the existing interface is lost because of the omission of the views named above. Due to
the modified database scheme, however, it is not possible to offer the views any longer.
6.1.4 Windows Vista / 64 Bit Operating Systems
▪ The WLAN modules Scalance W788/W744 cannot be configured on 64 Bit operating systems with
the PST tool.
6.1.5 Splice Points
▪ When using splice sensors don't repair damaged packaging units with splice because repair splice
points cannot be distinguished from the normal splice points.
NOTICE
The data access via OIB interface is recommended.