00198146-01_AI_120V_TX12_de_en.pdf - 第36页
36 Table Of Contents Assembly Instructions / Montageanleitung SIPLACE TX Series Option 120 V 04/2017
35
Assembly Instructions / Montageanleitung SIPLACE TX Series
Option 120 V 04/2017
Table Of Contents
Table Of Contents
1 Introduction.. 37
1.1 Safety Instructions.. 37
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 37
1.1.2 Safety Instructions for Working with Strong Magnetic Fields.. 38
1.1.3 Safety Instructions for the Power Supply (With SMPS).. 38
1.1.4 Safety Instructions for Work on the Cutting Device.. 40
1.1.5 Safety Instructions for the Gantry.. 40
1.1.6 Safety Instructions on Hazardous Materials.. 40
1.2 Preparatory Work..... 41
1.3 Other Instructions.. 43
1.3.1 Environmentally-Friendly Disposal of Materials and Components.. 43
1.3.2 Use of Original SIPLACE Accessories and Spare Parts.. 43
1.3.3 ESD Guidelines.. 43
1.3.3.1 Definition of ESD.. 43
1.3.3.2 Important Measures to Protect Against Static Charging.. 43
1.3.3.3 Handling ESD Modules.. 44
1.3.3.4 Measurements and Modifications to ESD Modules.. 44
1.3.3.5 Dispatching ESD Modules.. 44
1.3.4 Validity of Document.. 44
1.3.5 Release History.. 45
1.4 Staff Qualifications and Training.. 45
2 Brief Description.. 47
2.1 Product Description.. 47
2.2 Requirements and Restrictions.. 47
2.3 Scope of Delivery.. 48
2.4 Tools and Equipment required.. 48
2.5 Required Working Time.. 48
3 Installation.. 49
3.1 Performing Preparatory Work.. 49
3.2 Installing the Transformer.. 51
3.3 Exchanging the circuit breaker.. 53
3.4 Installing the socket protection.. 55
3.5 Performing Final Work.. 55
4 Appendix.. 57
4.1 Excerpts from the Service Manual.. 57
4.1.1 Electrical Checks.. 57
4.1.2 Checking For Absence of Voltage.. 58
36
Table Of Contents Assembly Instructions / Montageanleitung SIPLACE TX Series
Option 120 V 04/2017
Assembly Instructions / Montageanleitung SIPLACE TX Series
Option 120 V 04/2017
1 Introduction
1.1 Safety Instructions
37
1 Introduction
This manual describes the installation of the "120 V" option in SIPLACE® TX series machines.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.