00198146-01_AI_120V_TX12_de_en.pdf - 第45页

Assembly Instructions / Montageanleitung SIPLACE TX Series Option 120 V 04/2017 1 Introduction 1.4 Staff Qualifications and Training 45 1.3.5 Release History Document SIPLACE TX Series 120 V Option Assembly Instructions …

1 Introduction

1.3 Other Instructions

Assembly Instructions / Montageanleitung SIPLACE TX Series

Option 120 V 04/2017

1.3.3.3 Handling ESD Modules

Do not touch electronic modules unless it is absolutely essential to do so in order to carry out other

work. If it is necessary, make sure that you do not touch the pins or printed conductors when you

pick up flat modules.

Do not touch components unless

●

You are constantly earthed by an ESD wrist strap or

●

You are wearing ESD shoes or ESD shoe earthing strips on an ESD floor.

Always discharge yourself before you touch an electronic module. To do this, simply touch a con-

ductive and earthed object immediately before you touch the module (such as unpainted parts of a

switch cabinet, a water pipe, etc.).

Do not allow modules with chargeable and highly insulating materials to touch one another, e.g.

plastic films, insulating table surfaces or items of clothing made from synthetic fibers.

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD

foam, ESD bag or container).

Do not bring modules near visual display units, monitors or televisions. Keep them at least 10cm

away from the screen.

1.3.3.4 Measurements and Modifications to ESD Modules

Measurements of the assemblies may only be taken if

●

The measuring device has been grounded (e.g. via protective conductor) or

●

you discharge the measuring head before taking measurements with a potential-free measur-

ing device (e.g. by touching an unpainted metal part of the controller casing).

► Always use an earthed soldering iron if you carry out any soldering work.

1.3.3.5 Dispatching ESD Modules

► Always store modules and components in conductive packaging (e.g. metalized plastic bags

or metal sleeves) and dispatch them in conductive packaging.

► If the packaging is not conductive, place the modules in a conductive envelope before pack-

aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for ex-

ample.

► If the module has integral batteries, ensure that the conductive packaging does not touch or

short-circuit the battery terminals and, if necessary, first cover the terminals with insulating

tape or material.

1.3.4 Validity of Document

This document is valid for the following machine types:

●

SIPLACE TX Series

The work described in this manual is divided into modules, and to a large extent, it is identical for

all machine types:

●

If the work required for specific machines differs from the standard procedure, this will be in-

dicated with reference to the machine number, series and delivery state.

●

Illustrations are only shown as examples, for example, the illustration of a specific machine

type or a machine with different paint finish does not imply that the information following the il-

lustration only applies to the shown machine type.

Please read the circuit diagram folder for any electrical checks.

Assembly Instructions / Montageanleitung SIPLACE TX Series

Option 120 V 04/2017

1 Introduction

1.4 Staff Qualifications and Training

1.3.5 Release History

Document

SIPLACE TX Series

120 V Option

Assembly Instructions

Edition Changes

04/2017 First edition

1.4 Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up,

operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:

●

Have been trained, instructed or authorized to switch on and off, isolate, earth and identify

electrical circuits and system components in accordance with normal safety standards.

●

Have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-

cordance with normal safety standards.

●

Have received first aid training.

1 Introduction

1.4 Staff Qualifications and Training

Assembly Instructions / Montageanleitung SIPLACE TX Series

Option 120 V 04/2017