00195467-01_Installation Manual Setup Center 2.2.pdf - 第16页
SIPLACE Setup Center 2.2 Installation Manual 4.2.6 Recommended Installation Scenarios 4.2.6.1 Local Database Fig. 4-2 system configuration Local Database Usually the system configuration ‘Local Database’ is for a small m…
Installation Manual SIPLACE Setup Center 2.2
4.2.5 Docking Stations
The installation of the docking station is necessary; If equipment of the X-Series is used and a pre
setup area or kitting area exists.
15 of 90
-
SIPLACE Setup Center 2.2 Installation Manual
4.2.6 Recommended Installation Scenarios
4.2.6.1 Local Database
Fig. 4-2 system configuration Local Database
Usually the system configuration ‘Local Database’ is for a small manufacturing facility with one
ore two production lines. An assumption for the configuration is that the SIPLACE Pro database is
also installed locally and no SIPLACE EDM is used. The Setup Center GUI is directly connected
to the local SIPLACE Pro and local Setup Center Database and manages the setup verification
for the stations connected via the SIPLACE LAN.
This scenario can also be used, if a step-by-step introduction is helpful. Then it may also helpful
to omit the ‘Forced Setup Verification’ activation and to start with the unforced setup verification.
After a definite time the forced setup verification can be activated at station and Setup Center.
16 of 90
Installation Manual SIPLACE Setup Center 2.2
4.2.6.2 Central Database
Line Computer
Siplace Pro Setup Center GUI
Database Server
SIPLACE Pro
Database
Costumer LAN
Machine
Machine
SC Computer (Pre Setup Unit)
Setup Center GUI
Forced Setup
Verification
Forced Setup
Verification
CAN Bus
SIPLACE Setup Center
Database
Legende
Computer Software Package
Database
Siplace Pro
Line Computer
Siplace Pro Setup Center GUI
Machine
Machine
Forced Setup
Verification
Forced Setup
Verification
Line Computer
Siplace Pro Setup Center GUI
Machine
Machine
Forced Setup
Verification
Forced Setup
Verification
Machine
Forced Setup
Verification
Fig. 4-3 system configuration Central Database
Usually the system configuration ‘Central Database’ is for manufacturing facility with more than
one production line. Prerequisites for the configuration is
• the SIPLACE Pro database is also installed centrally, or
• the SIPALCE EDM product is deployed, or
• a pre setup area with Setup Center is planned, or
• packaging units often moves between different placement lines
The Setup Center GUIs are connected to the local SIPLACE Pro and to the central Setup Center
Database. The docking stations are connected via CAN-Bus to the SC Computer. The pre setup
unit is the reason, why a central Setup Center Database is necessary.
17 of 90
-