00197964-01_AI_Flex-Head-Options-Configuration_en.pdf - 第13页

Installing Flex Option 1 Assembly Instructions SIPLACE E 13 2 2 I n s t a llin g F le x O p t io n 1 Installing Flex Option 1 ▪ A sta ndard ma chine with NC FLEX std. cpl [ 03107775-xx] is equipped with one m agazine ho …

Introduction

Staff Qualifications and Training 1.3.6 SIPLACE on the World Wide Web (WWW)

12 Assembly Instructions SIPLACE E

1.4

1.4 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord

ance with normal safety standards.

▪ Have received first aid training.

1.5

1.5 Abbreviations

Abbreviations

Abbreviations Description

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

CPP Collect&Pick&Place head

CPx Collective term for CPP, CP20, CP14, CP12 and/or CP6

CP6 SIPLACE CP6, Collect&Place head with 6 segments

CP12 SIPLACE CP12, Collect&Place head with 12 segments

CP14 SIPLACE CP14, Collect&Place head with 14 segments

EMC Electromagnetic compatibility

ESD Electrostatic sensitive device

HMI Human machine interface (Operator panel)

JTF-MW JEDEC Tray Feeder (Automatic tray changer)

PCB Printed circuit board

P&P Pick&Place

PP SIPLACE PP, Pick&Place head

SC Station computer

TH SIPLACE TH, Twin Pick&Place head

Installing Flex Option 1

Assembly Instructions SIPLACE E 13

2 Installing Flex Option 1

Installing Flex Option 1

▪ A standard machine with NC FLEX std. cpl [03107775-xx] is equipped with one magazine holder with

two passive nozzle magazines of type [03103613-xx] and one passive nozzle magazine of type

[03109863-xx] at location 2.1.

▪ The large reject bin [03109719- xx] is located on the left at Location 2. The small reject bin

[03109739-xx] is located on the left at location 1.

Passive Nozzle Magazine Type (Quick Reference)

Standard Flex Flex Option 1

2x Magazine cpl. / 2 nozzles P&P / E-series

[03103613

xx]

1x Magazine cpl. / 1 nozzle P&P / E-series

[03109863

xx]

1 Location 1 2 Location 2

Flex Option 1 Configuration NC FLEX LOC 2.2 cpl. [03113126-xx] is located at the highlighted area.

It consists of a magazine holder with a flexible number of passive nozzle magazines ([03103613-xx] or

[03109863-xx]).

The order quantity depends on the customer's preference.

Installing Flex Option 1

14 Assembly Instructions SIPLACE E

Installation Procedures (Taking Location 2.1 as an Example)

► Place the height measurement block FLEX LOC2 [03118537-xx] onto the shim cover and move head

holder manually towards the block with care.

► Check the gap with a feeler gauge (1).

► Determine the gap and the number of NC shims [03108395-xx] required.

Magazine holder single and double P+P magazine

► Place the magazine holder cpl./NC P+P/E-series [03103612-xx] onto the shim cover once the height

is adjusted.

► Secure it with four M5x20 cap screws at both ends.

► Height measurement block FLEX LOC2 [03118537-xx] is required to up

grade in the field.

► Mount the shim cover [03108393-xx] onto the mounting block Flex

[03106636-xx] at location 2.

► Mount the required shims underneath the shim cover and fasten them

with an M3x8 countersunk screw.