00197964-01_AI_Flex-Head-Options-Configuration_en.pdf - 第15页

Installing Flex Option 1 Assembly Instructions SIPLACE E 15 ► Assemble the necessary nozzl e magazines as illustrated. We recommend placing the singl e magazine [0 310986 3-xx] on the l eft where the m achine frame shoul…

Installing Flex Option 1

14 Assembly Instructions SIPLACE E

Installation Procedures (Taking Location 2.1 as an Example)

► Place the height measurement block FLEX LOC2 [03118537-xx] onto the shim cover and move head

holder manually towards the block with care.

► Check the gap with a feeler gauge (1).

► Determine the gap and the number of NC shims [03108395-xx] required.

Magazine holder single and double P+P magazine

► Place the magazine holder cpl./NC P+P/E-series [03103612-xx] onto the shim cover once the height

is adjusted.

► Secure it with four M5x20 cap screws at both ends.

► Height measurement block FLEX LOC2 [03118537-xx] is required to up

grade in the field.

► Mount the shim cover [03108393-xx] onto the mounting block Flex

[03106636-xx] at location 2.

► Mount the required shims underneath the shim cover and fasten them

with an M3x8 countersunk screw.

Installing Flex Option 1

Assembly Instructions SIPLACE E 15

► Assemble the necessary nozzle magazines as illustrated.

We recommend placing the single magazine [03109863-xx] on the left where the machine frame

shoulder clearance is located.

Installation at Location 2.2

Machine overview

► Place the mounting block (4) onto the 2 dowel pins (1) of the ETD, NC mounting left TWIN cpl. (3).

► Secure the mounting block (4) with 1 cap screw (2).

1 Ø4x20 dowel pins

(preinstalled in (3))

2 M4x16 cap screw

3 ETD, NC mounting left TWIN cpl.

[03113123

xx]

(standard FLEX machine configuration)

4 Mounting block left 2B [03112942

xx]

Installing Flex Option 1

16 Assembly Instructions SIPLACE E

► Place the mounting extension right cpl. (3) onto the two dowel pins (1).

► Fix the mounting extension on the machine frame using two M5x20 cap screws (2).

► Place the mounting block right 2B FLEX (1) onto the two dowel pins (2).

► Fix the mounting block on the mounting extension using one M4x16 cap screw (3).

► Continue with the same installation steps for the followings at location 2.2:

⇨ Shim cover nozzle station [03108393-xx]

⇨ Shim nozzle station [03108395-xx]

⇨ Magazine holder cpl. [03103612-xx]

⇨ Passive nozzle magazines [03103613-xx] or [03109863-xx]

1 Dowel pins 2 M5x20 cap screws

3 Mounting extension right cpl.[03112585

xx]

1 Mounting block right 2B FLEX

[03112578

xx]

2 Dowel pins

Preinstalled in [03112585-xx] (part in blue)

but not [03112578-xx] (part in green)

3 M4x16 cap screw