SOM-1627-002.pdf - 第54页

*5 Number of Pages Displayed are the total number of pages and the number of the current page. Example: (3/5) T otal Number of Pages : 5 Number of Current Page : 3 *6 [Prev] and [Next] Buttons [Prev] Button : When presse…

*3 *1

10.1 “ERROR” Windows

••

• Window Layout

When the machine detects an error, the following “ERROR” window

opens.

Fig. 105 Example of “ERROR” Window

••

• Window Composition

*1 Recognition Error ID

Displayed is a string of alphanumeric characters (10 characters)

that identifies an error.

When an error has occurred, use this recognition error ID as an

index and refer to “10.4 Recognition Error IDs and Remedial

Procedures” for details.

*2 Item

Displayed is a name of the classified element that caused an

error.

*3 Description

Displayed are the contents of the error.

*4 Date and Time

Displayed are the date and time of error occurrence.

10.1 “ERROR” Windows

0102-001 51 AGQ01EGP

*5 Number of Pages

Displayed are the total number of pages and the number of the

current page.

Example: (3/5)

Total Number of Pages : 5

Number of Current Page : 3

*6 [Prev] and [Next] Buttons

[Prev] Button: When pressed, this button opens the previous

page.

[Next] Button : When pressed, this button opens the next page.

*7 [Clear Alarm] Button

When pressed, this button cancels an alarm (sound) only.

*8 [RETURN] Button

When pressed, this button cancels an alarm (sound) and closes

the "ERROR" window. The original window resumes.

••

• Reset Procedure from "ERROR" Window

(1) Take a note of "Recognition Error ID", "Item (Error Name)", and "De-

scription" in the "ERROR" window.

When you have forgotten an error message, refer to the list

of errors in the "Machine Error Recall" window. (Operation

Sequence: [RECALL] Button (Submenu) Æ "Device Err"

Window).

(2) Press the [RETURN] button to resume the original window.

(3) Use the recognition error ID as an index and refer to "10.4 Recogni-

tion Error IDs and Remedial Procedures" for details.

0308-002 5 2

AGQ01EGP

10.1 "ERROR" Windows

10.2 Typical Description

Table 16

Recognition Error ID Item Description

02 ** 1000 ** Component Missing Component was not found.

(Cause 1) The feeder carriage is loaded with a feeder that contains components differ-

ent from the specified ones.

(Cause 2) The vacuum suction force is too weak.

(Cause 3) An improper nozzle is selected for the components or vice versa.

Mismatching parameters are set in the nozzle type data and the component

library data.

(Remedy 1) Check if proper components are used.

(Remedy 2) Check the vacuum pressure.

(Remedy 3) Check the parameters in the nozzle type data and the component library

data.

02 ** 2101 ** Error in Outward Length Inspection Component Outward Length X is incorrect.

(Cause 1)

(Remedy 1)

(Continued to the next page.)

*1 The recognition error IDs (IDs displayed in the “ERROR” win-

dow) are described in the numerical order.

*2 Described are the error name (item) and the description in the

“ERROR” window.

*3 Described are the causes and remedial procedures of the errors

in “*2 (Item and Description)”

The causes and remedies are correlated as follows.

(Cause 1) Æ (Remedy 1)

(Cause 2) Æ (Remedy 2)

(Cause 3) Æ (Remedy 3)

*4 This indicates that the related contents are described subse-

quently on the next page.

10.2 Typical Description

*2 *3

0102-001 53 AGQ01EGP