YG12F_Ope_E.pdf - 第94页
2-36 2 asic operation n When using tape components 6 Set the "F eeder T ype". Double-click the "E: Feeder Type" entry field to open the pull-down menu and select the feeder type to use (from among 8…
2-35
2
asic operation
3
Open the Parts screen.
Press the [Parts] button to open the Parts screen and select the component from the upper list.
Parts screen
24221-M7-00
4
Display the basic parameters.
Select the [Basic] tab to display the basic parameters.
5
Set the "Package" parameter.
Double-click the "Package" parameter field and select "Tape" or "Tray" from the drop-down list according
to the component supply unit to be used.
[Parts]-[Basic] screen
"Package" parameter
"Package"
24222-M7-00
c
2-36
2
asic operation
n
When using tape components
6
Set the "Feeder Type".
Double-click the "E: Feeder Type" entry field to open the pull-down menu and select the feeder type to
use (from among 8mm tape, 8mm 0603, 8mm 1005, 12mm long pitch and 16mm Emboss).
Changing the package type will also change the feeder type, so reassign the settings.
[Parts]-[Basic] screen
Feeder type
Feeder Type
24223-M7-00
n
When using tray components
6
Set the "Feeder Type" parameter.
Select "Auto TC" from the drop-down list.
[Parts]-[Basic] screen
Feeder Type
Feeder Type
24224-M7-00
2-37
2
asic operation
5.2 Operation check
n
Checking the tape feeder operation
Check if operation is correct after setting the tape feeder on the mounter.
1
Open the feeder screen.
Press the [Unit] button and then select the [Feeder] tab to open the feeder screen.
Feeder screen
24225-M7-00
2
Select the feeder.
Click the feeder plate number section or use cursor buttons in upper part of the screen to select a
number of the feeder plate where the tape feeder you want to operate is installed.
Feeder screen
Selecting the feeder
24226-M7-00