00197402-01 AI X-Feeder Upgrade Package.pdf - 第24页
24 AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package
AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package 23
Table of Contents
1 Introduction 25
1.1 X-Feeder Upgrade Package 25
1.2 Safety Instructions 25
2 Required parts 27
2.1 Re-used parts 27
2.2 Content retrofit package 28
3 X-Feeder Upgrade Install 29
3.1 Removing the Left Side Cover 29
3.2 Remove the cable connection to the distribution board 29
3.3 Remove the screws on the right side of the feeder 30
3.4 Dismantle of foil drive 30
3.5 Replacing the stuffing gear and parts of the cover strip rocker 31
3.6 Replace parts of the rocker 32
3.7 Fitting the Flap Tape Disposal 32
3.8 Cover foil disposal install 33
3.9 Installing the rocker on the foil container 34
3.10 Fitting the Left Side Cover 34
3.11 Fully installed upgrade package 35
24 AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package
Introduction
X-Feeder Upgrade Package
AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package 25
1
1 Introduction
Introduction
1.1
1.1 X-Feeder Upgrade Package
X-Feeder Upgrade Package
The X-Feeder Upgrade Package is a retrofitting for X-feeders, which offers the possibility of the opera
-
tion and the film transport of X-feeders significantly.
▪ Modified rocker and film guide! No further distinction is required, if is made with or without PSA film
(Pressure Sensitive Adhesive very sticky film edges). The clips can be dispensed with.
▪ Toothed stuffing gear on film transport! Improved grip on the foil and therefore safer and faithful
transport the film.
▪ Flap on the film container with magnetic lock! Defined force when the valve opens.
The upgrade package is available for 16-104mm X feeder.
▪ SIPLACE X-Feeder Upgrade Package X16 [03096682-xx]
▪ SIPLACE X-Feeder Upgrade Package X24 [03085739-xx]
▪ SIPLACE X-Feeder Upgrade Package X32 [03085751-xx]
▪ SIPLACE X-Feeder Upgrade Package X44 [03085492-xx]
▪ SIPLACE X-Feeder Upgrade Package X56 [03085761-xx]
▪ SIPLACE X-Feeder Upgrade Package X72 [03085771-xx]
▪ SIPLACE X-Feeder Upgrade Package X88 [03085781-xx]
▪ SIPLACE X-Feeder Upgrade Package X104 [03086059-xx]
1.2
1.2 Safety Instructions
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam
-
age to equipment. These notes are highlighted by different symbols and are indicated as follows accord
-
ing to the level of risk:
1. Revised with new rocker design stuffing gear
- More grip on the film with uniform insertion force.
2. New film roll
- film is folded automatically, ie the feeder works well,
if you work with or without sticky film.
3. Use cover strip rocker
- Supports the folding of the foil in combination with
the folding roller.
4. Revised flap on the cover foil disposal
- Open immediately, if the foil tank is full (either open
or closed).
NOTICE
Note for the use of safety instructions
Please observe the safety instructions in the user manual of the relevant machine for all work!
CAUTION
Pay attention to feeder module ESD safety:
Before you open the side cover, make sure you are wearing the ESD protection wristband, to
prevent damage to the highly sensitive boards inside the feeder module.