SYSTEMS-8020665-REV_K.pdf - 第3页

Q X 15 0 i ™ | 2D AO I High-V alue, F lexible for All Applica tions • St robed Ins pec tion Modu le ( SIM ) • Ideally s uit ed for pre-reow and selective solder joint inspe ctio n QX 1 50i™ B, QX 1 50™ T abletop, L arge…

100%1 / 10
Automated Optical Inspection (AOI)
Best-in-Class 3D AOI Technology
SQ3000™
|
Multi-Function
Ultimate in Speed and Accuracy
• Multi-process capability for 3D AOI, SPI and CMM
• Delivering metrology grade accuracy at
production speed, powered by MRS Technology
• SQ3000™ X available for Large Board capability
• SQ3000 for 3D AOI only and SQ3000 for 3D SPI
only also available
Proprietary 3D Multi-Reection Suppression™ (MRS)
Sensor Technology
The revolutionary MRS technology delivers unmatched accuracy by meticulously identifying and
rejecting reections caused by shiny components and reective solder joints. Eective suppression
of multiple reections is critical for highly accurate inspection and measurement, making MRS an
ideal technology solution for a wide range of applications including those with very high quality
requirements.
CyberOptics’ unique sensor architecture with 4 multi-view 3D sensors and a parallel projector,
simultaneously captures and transmits multiple images in parallel while proprietary 3D fusing
algorithms merge the images together, delivers metrology grade accuracy at production speed.
Powered by
MRS™ Technology
AOI SYSTEMS
SQ3000™ DD
|
3D AOI
Dual Lane - Dual Sensor
• Dual MRS Sensors
• Delivering metrology grade accuracy at
production speed, powered by MRS Technology
• Switch from dual to single lane to inspect large
boards
• SQ3000™ D Dual Lane option available
NEW
Ultra-High Res
MRS Sensor
SQ3000 DD Dual Lane - Dual Sensor
The SQ3000 DD 3D Automated Optical Inspection (AOI) System is an extension of the award-winning SQ3000 3D AOI platform. The dual
lane, dual sensor system maximizes exibility catering to varying PCB widths. This unique design provides the ability to inspect high volume
assemblies, the convenience of inspecting dierent assemblies and board sizes simultaneously on dierent lanes, or even switching from
dual lane to single lane mode to inspect very large boards.
Not only does the SQ3000 DD provide PCB exibility, it also provides the exibility to choose two of the same or two dierent proprietary
MRS sensors.
Dual Board
Large Board
510 mm (20”)
510 mm (20”)
300 mm (11.8”) (D)
330 mm (13”) (DD)
300 mm (11.8”) (D)
330 mm (13”) (DD)
510 mm (20”)
510 mm (20”)
SQ3000 Multi-Function for 3D AOI, SPI & CMM
SQ3000 with MRS technology has multiple sensor options to meet even the most
challenging applications. CyberOptics has advanced the proprietary Multi-Reection
Suppression (MRS) sensor to an even ner resolution. The Ultra-High Resolution MRS
sensor enhances the SQ3000 platform, delivering superior inspection performance, ideally
suited for the 0201 metric process and microelectronic applications where an even greater
degree of accuracy and inspection reliability is critical.
SQ3000 is an all-in-one solution that’s loaded with powerful tools that cover inspection
and measurement for AOI, SPI and CMM applications. SQ3000-X oers support of large
board capability of up to 720 x 620 mm board sizes.
Coordinate Measurement (CMM)
Socket Metrology Example
Automated Optical Inspection (AOI) Solder Paste Inspection (SPI)
QX150i™
|
2D AOI
High-Value, Flexible for All Applications
• Strobed Inspection Module (SIM)
• Ideally suited for pre-reow and selective solder
joint inspection
QX150i™ B, QX150™ Tabletop, Large Board and Dual Lane options available
SIM (Strobe Inspection Module)
01005 component size inspection capability
Active Pixel Marking Selective Soldering Inspection
Floating Pin
Missing Pin
Pre-Reow Inspection
OK
NG
Intelligent Ranking of Examples Components Inspected / Detected
AOI SYSTEMS
Automated Optical Inspection (AOI)
High Value - Flexible Inspection 2D AOI Technology
MX600™
|
2D AOI for FVI
Best Performance + Lower Cost of Ownership
• 2 Strobed Inspection Modules (SIM)
• Automated Final Vision Inspection (FVI) for singulated
memory modules
QX250i™
|
2D AOI
Fast, Flexible, High-Performance
• 2 Strobed Inspection Modules (SIM)
• Shortens production line and delivers ~50%
productivity improvement vs. single SIM
• Ideally suited for pre-reow
QX600™
|
2D AOI
Ultra-Fast, Ultra-Versatile
• Strobed Inspection Module (SIM)
• Best-in-Class 01005 and solder joint
inspection
2D AOI Sensor Technology - High-speed,
On-the-y Inspection
The SIM (Strobed Inspection Module) is at the core of every CyberOptics’ 2D AOI
system. Designed and manufactured exclusively by CyberOptics, the SIM delivers
high performance inspection at 200cm/sec on the QX600.
The SIM is designed with enhanced illumination using LED lighting - delivering the
best 01005 and solder joint performance ever. With an 80/150 Megapixel sensor and
higher resolution (12µm), you get crisp, perfect quality images for more accurate
defect review. The capabilities shown below are achieved with CyberOptics’ 2D and
3D AOI systems.
Memory Module Post-Test
Defect Types, Pre-Shipping
Inspection
Inspection Capability includes:
- Components Edge
- Damage PCB Corner
- Goldnger Discolored / Burnt / Badly Scratched
- Gold tab inspection - Lifted tie bar, burnt, contamination
- Physically Damaged Components
Intuitive, Easy-to-use Software
The multi-award winning SQ3000 AOI software is a more powerful yet
extremely simple software designed with an intuitive interface. Including
multi-touch controls, 3D image visualization tools and ultra-fast programming
capabilities that brings ease-of-use to a completely new level, which reduces
training eorts and minimizes operator interaction - saving time and cost.
AI
2
- Superior in Programming &
Performance
CyberOptics AI
2
(Autonomous Image Interpretation) technology is all about
keeping it simple - no parameters to adjust or algorithms to tune. And, you do
not need to anticipate defects or pre-dene variance either - AI
2
does it all for
you. With AI
2
, you have the power to inspect the most comprehensive list of
features and identify the widest variety of defect types - including those that
you least expect.
Perfect for those high-mix or low volume applications. With its unique ability
to ‘ignore’ bad examples in a model, AI
2
oers precise discrimination even with
excessive variance and minimizes eects of outlier examples. The pixel marking
feature highlights defective spots, so you can identify genuine defects instantly.
CYBERREPORT
SPISOFTWARE
AOISOFTWARE
CYBERREPORT
CYBERCMM
SPISOFTWARE
AOISOFTWARE
CYBERCMM
CYBER
PRINTOPTIMIZER
CYBER
PRINTOPTIMIZER
AOI SYSTEMS
Award-Winning AOI Software
Faster, Simpler and Smarter
CyberReport™ - Fast, Scaleable SPC Solution
CyberReport oers full-edged machine-level to factory-level SPC capability with powerful historical analysis and reporting tools
delivering complete traceability for process verication and yield improvement. CyberReport is easy to setup and simple to use while
providing fast charting with a compact database size.
Factory-level SPC
Line-level SPC
Machine-level SPC
Yield
CYBERREPORT
SPISOFTWARE
AOISOFTWARE
CYBERREPORT
CYBERCMM
SPISOFTWARE
AOISOFTWARE
CYBERCMM
CYBER
PRINTOPTIMIZER
CYBER
PRINTOPTIMIZER
Faster, Highly Accurate Coordinate
Measurement (CMM) Suite
CyberCMM™, a comprehensive software suite of coordinate measurement tools provides highly accurate, 100% metrology-
grade measurement on all critical points much faster than a traditional CMM, including coplanarity, distance, height and
datum X, Y to name a few.
A fast and easy set-up can be performed with the world’s rst in-line CMM system for programming complex applications
as compared to slow, engineering resource-intensive set-up that typically requires multiple adjustments with traditional
coordinate measurement machines (CMMs).
CYBERREPORT
SPISOFTWARE
AOISOFTWARE
CYBERREPORT
CYBERCMM
SPISOFTWARE
AOISOFTWARE
CYBERCMM
CYBER
PRINTOPTIMIZER
CYBER
PRINTOPTIMIZER
Enable Smarter, Faster Inspection
Speed programming and tuning with new capabilities including AutoTeach,
AutoTune and AutoDene for faster set-up and to simplify process.
• New body inspection settings and lead inspection settings; automatically
teaches from the height map what parts are loaded based upon CAD data.
Lead inspection settings include 3D area measurement.
• New gap inspection settings; blob analysis - looks at height in between leads
beyond using an image
• New AutoDene Feature; automatically detects and adds inspection features
including leads and gaps by drawing a box around the package or component
• New AutoFeatureSet and AutoTune; adds body, leads and gaps inspection
features to training set data. AutoTune sets nominals for the specic package.
Sample Report
Failed Model
Passed Model
AutoDene Example