TX系列贴片机机台半年保养手册.pdf - 第21页
4 WF 3 TX-Series Maintenance Remove the CPPx to be maintained 12 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e…
www.asm-smt.com
4 WF 3 TX-Series Maintenance Remove the CPPx to be maintained 12 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T14, T58
Wear Part: Consumables:
www.asm-smt.com
1 Move the gantry with the head to be main-
tained to the end limit.
2 Put on the component sensor protection. 3 Move the gantry with the head to be main-
tained to a good working position.
4 Unplug the compressed air connections
from the head.
5 Open the two clips (1) and unplug the rib-
bon cables(2).
6 Open the camera cable clip.
4 WF 3 TX-Series Maintenance Remove the CPPx to be maintained 12 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T14, T58
Wear Part: Consumables:
www.asm-smt.com
7 Release the plug lock and unplug the two
camera cables.
8 Loosen the screws (1) and (2) on the left
fixing the head.
9 Loosen the screws (1) and (2) on the right
fixing the head.
10 Take the head from the hook. 11 Put the head into the transport container.