TX系列贴片机机台半年保养手册.pdf - 第36页
11 WF 3 TX-Series Maintenance Check / replace compressed air filter 3 min 2 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a …
11 WF 3 TX-Series Maintenance Check / replace compressed air filter 3 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W20
Consumables:
www.asm-smt.com
1 If necessary unscrew and remove the side
panel cover.
2 Turn off the air and push the lever to hori-
zontal.
3 Turn the activator until the knurled head
screw is even to the housing.
4 Check the complete venting of the system
before proceeding.
5 Remove the container. 6 Unscrew the filter.
11 WF 3 TX-Series Maintenance Check / replace compressed air filter 3 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W20
Consumables:
www.asm-smt.com
7 Check the filter for contamination. 8 If OK return it to the filter unit. 9 If NOT OK replace it with a new one.
10 Screw the filter on by hand. 11 Return the container. 12 Close the activator.
11 WF 3 TX-Series Maintenance Check / replace compressed air filter 3 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W20
Consumables:
www.asm-smt.com
13 Open the lever. 14 If necessary return and screw on the side
panel cover.