TX系列贴片机机台半年保养手册.pdf - 第45页
14 WF 3 TX-Series Maintenance Clean the feeder modules and cut the tapes 3 min 1 / 1 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e…
13 WF 3 TX-Series Maintenance Check / replace the vacuum pump filter disk 4 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T86
Wear Part:
W31
Consumables:
C19
www.asm-smt.com
7 If NOT OK exchange the filter. 8 Return the vacuum filter. 9 Lock the edgewise retaining clamp.
10 Close the panel.
14 WF 3 TX-Series Maintenance Clean the feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from the
feeder modules.
2 Cut the remaining tapes at the feeder. 3 Ensure to leave 2 holes overlap when cut-
ting.
4 Repeat steps 1-3 at all feeder tables.
www.asm-smt.com