manual-fae1p-fume-extractor-0034505_ID-248873_EN.pdf - 第9页

Filter set Filter set 1 Carbon life 90% 2 Saturation 20% 3 Reset carbon Back Back Counters Counters 1 Total 2 Partial Back Back Total Counters Total Counters 1 Plugged hrs 100 2 Idle hrs 10 3 Work area hrs 70 4 Stand hrs…

100%1 / 20
4 Filter set
5 Counters
6 Program version
Main menuMain menu
Exit
1 Reset
2
Unit
3
Port
UnitUnit
1 Continuous mode OFF
2
Beep ON
3 PIN OFF
4 Change PIN
PortPort
1 Program Ctm - 100%
2
Delay to stop
3
Pedal
BackBack
5 Workbench 1
BackBack
Delay to stopDelay to stop
1 Work area 5 sec
BackBack
PedalPedal
1 Activation One-touch
2 Mode Pressed
BackBack
Custom programCustom program
Select work area flow
80 %
PortPort
1 Program Ctm - 100%
2
Delay to stop
3
Pedal
CustomCustom
BackBack
2 Stand 30 sec
8
Menu Interface
OK
see next page
Main Menu
(Original PIN: 0105)
“Stand” not available for 2 workbenches configuration
Filter setFilter set
1 Carbon life 90%
2 Saturation 20%
3 Reset carbon
BackBack
CountersCounters
1 Total
2 Partial
BackBack
Total CountersTotal Counters
1 Plugged hrs 100
2 Idle hrs 10
3 Work area hrs 70
4 Stand hrs 20
5 Work area cys 10
BackBack
Partial CountersPartial Counters
1 Plugged hrs 100
2 Idle hrs 10
3 Work area hrs 70
4 Stand hrs 20
5 Work area cys 10
6 Reset
BackBack
4 Filter set
5 Counters
6 Program version
Main menuMain menu
Exit
1 Reset
2
Unit
3
Port
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
Not available for
2 workbenches
configuration
Menu Interface
Main Menu
(Original PIN: 0105)
see previous page
STOP STOP ## 44
Cover opened or badly
closed. Double check the
cover.
FlowFlow
H M L
Saturation 20%
FilterFilter
Carbon life 90%
Aspiration
ON
10
If the display shows STOP#4, power off the fume extractor, remove the cover, place it back and
secure it by using the quick release levers.
Fume Extractor Activation
Once the fume extractor is turned on, the display shows a similar screen as the following one and
the filter saturation indicator is green if the carbon filter lifetime is higher than 20%.
Troubleshooting
Station troubleshooting available on the product page at www.jbctools.com
Parameters
Important: Power off soldering stations connected to the fume extractor before
modifying any parameter.
Unit
Parameter
Continuous mode
Beep
PIN
Change PIN
Workbench
Description
Enable/disable continuous aspiration. Fume extractor aspirations remains
active independently from tool or pedal status.
Enable/disable the sound of the keypad.
Enable/disable PIN request when modifying parameters.
Change the default security PIN code.
Default PIN 0105
Select working mode for 1 or 2 workbenches (see page “Menu Interface”).
- Green: Filter OK
- Yellow: ≤ 20% carbon lifetime
or about to saturate
- Red: End of carbon lifetime
or filter saturated