DECAN_S1_Maintenance(Eng_Ver1.1)_Print.pdf - 第21页
chapt er 1 This Chapter describes the work environment and working tools for the maintenance of the machine. Conditions fo r Main t e nanc e Nex t Generation, Multi- Functi onal Placer DE CAN S1 M ain ten anc e Ha nd boo…
chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
1-11
Tools for Maintenance
3. How to use the lubricator
Step 1.
Components of the lubricator: Lubricator-1, Connection
Tube-2, Nipple Tip-2
Step 2.
Use short nipple tip for X L/M guide lubrication.
Step 3.
Use long nipple tip for the lubrication of parts in
common use.
Step 4.
Pull the cylinder lever backward until it hangs from the
groove and then fill the lubricator with grease.
Step 5.
Assemble the lubricator nozzle and body.
chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
1-12
Tools for Maintenance
Conditions for Maintenance
Step 6.
Move the rear lever forward and remove the air inside
the lubricator using the handle.
Step 7.
After visual check, inject appropriate amount of grease
pressing the handle.
Step 8.
After lubrication, remove the waste grease that has
leaked out.
Caution
Inject the specified grease using the specified lubricator according to
the proper method.
Do not lubricate in any manner other than that shown above.
If the machine's operating environment is harsh, check its lubrication
status frequently.
chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Next Generation, Multi-Functional Placer
DECAN S1 Maintenance Handbook
1-13
Tools for Maintenance
4. Grease List
Part No. Part Name Use Specifications Ref.
CM01-900473 TRI-FLOW [59ML] - Nozzle TRI-FLOW -
HP09-000258 SUPPLY,OIL-GREASE-GUN_MG70_THK
- X Frame LM Guide
- Y Frame LM Guide
- Conveyor Lead Screw
- Conveyor Lead LM Guide
- X Frame Ball Screw
MG70
70g Exclusive use
GUN
CM02-900022 GREASE GADUS S2 V220-2
- Head Head Spindle, Mirror CAM
- Conveyor LM Guide
- Conveyor Lead Screw
GADUS S2 V220-2 -
CM02-000083 GREASE-GREASE_AFE-CA+70_THK;SYNTHETIC,OL
- X Frame LM Guide, Ball Screw
- Y Frame LM Guide
AFE-CA+70 -
CM02-000084 GREASE-GREASE_AFE-CA+400_THK;OIL,SYNTHET AFE-CA+400 -