00196283_Install_WinXP_unattended_CD.pdf - 第28页

Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE Installationsanleitung für Windows XP (unattended setup) CD V3.0 28 6 Corrected Defect s The following defects have been corre cted: Defect Corr…

100%1 / 56
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
27
5.14 Standard Settings and final administration tasks for SIPLACE Pro
computer
5.14.1 Default settings
Screen area: 1024 x 786, 16777216 Colors, 60 Hz Refresh Frequency
Time Zone: GMT (London, Edinburgh, Lisbon)
Keyboard-Layout: English (US)
Network Protocol: TCP/IP
In addition to the default user groups of Windows XP, the following users and user groups will be configured:
User: plr, SIPLACEServices, SIPLACEAdmin
Hint: If the computer you installed, is equipped with a CRT, please set the refresh frequency to a higher
value. The preset 60 Hz is intended for TFT-displays!
5.14.2 Passwords
Administrator
After the unattended setup, the default password will be MS128 for the local administrator. Please assign
a new password for your administrator!
plr
The default user „plr“ has the default password plr. It is preferable but not necessary to leave this
password.
SIPLACEServices
The user „SIPLACEServices“ was created for the COM+ Components. Please don’t change the
password. Otherwise the necessary rights of the SIPLACEPro Components will be lost!
Administrator group
The local administrator group also has the user „SIPLACEAdmin“. Don’t remove this user from the group.
Otherwise the Support Personnel can’t perform any maintenance. The SIPLACE Service Personnel
knows the password. Don’t change the password!
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
28
6 Corrected Defects
The following defects have been corrected:
Defect Corrected Defect - Description
1-FFTKH The default refresh rate is set to 60Hz. This is to low. The resolution can be
increased. The default refresh rate has been corrected
D1-
3278021
4
The installation was performed on the second disk, because the second disk is
formatted and the first disk was not formatted (Econel100). The state of delivery
was changed.
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
29