XP-241E-05.1JE PART LIST.pdf

ＰＡＲＴＳＬＩＳＴＸＰ−２４１Ｅ PTS-XP241E-05.1JE FUJI Machine Mfg.Co.,Ltd.

ＰＡＲＴＳＬＩＳＴ

ＸＰ−２４１Ｅ

PTS-XP241E-05.1JE

FUJI Machine Mfg.Co.,Ltd.

納入後第三者への転売をお考えの際には、必ず事前に弊社へご連絡

下さい。

Consult FUJI beforehand if you are considering selling

this equipment to a third party after it has been installed.

Before Using The Parts List

1. Specify a part number, code number, quantity, part name and rating when ordering parts.

Ensure to check the serial number of your machine before contacting Fuji.

2. This parts manual is subject to change without notice.

3. There are cases where there are no numbers in the left hand column of the parts list. This is not because they were omitted or

the list is incomplete but because the parts to which the numbers applied were eliminated due to a design change.

In such cases the parts have also been removed from the figures.

4. A redesigned part (the last digit of the part number is incremented) is compatible with a part before the redesign.

However,the original part is not always compatible with the revised part,e.i.,ABC1231 is compatible with ABC1230,but

ABC1230 is not always compatible with ABC1231.

5. The characters in the “Materials” field of the list are abbreviations for the following materials.

FE:

Iron

CO: Copper

OT: Other

AL: Aluminum PL: Plastic

6. Standard torque levels should be applied when tightening bolts during maintenance.

For areas requiring non-standard torque or adhesive, the torque value and adhesive have been added to each page.

(N･m)

Standard Torque Chart

Ｍ２Ｍ２.５Ｍ３Ｍ４Ｍ５Ｍ６Ｍ８Ｍ１０Ｍ１２Ｍ１６Ｍ１８Ｍ２０

0.44 0.88 1.96 3.92 7.84 12.74

32.34 64.68 117.6 303.8 401.8 588

0.35 0.78 1.47 3.23 5.88 9.31

18.62 37.24 42.14 88.2 98 117.6

・ 1Kgf･㎝≒0.098N･m

・ 1Kgf･㎝≒9.8N･㎝

・ 1N･m≒10.2Kgf･㎝

Blueprints created : JUN 2004

05JE released : JUL 2004