00193796-05.pdf - 第17页

Installation Manual, Station Software Version 505.03 Edition 04/2005 3.2.4 Machine controller 3.2.4.1 Machine controller HF, HF/3 Name Simicro CPU076 CPU / clock frequency PIII / 566 MHz RAM memory 64 MB Hard disk 6 GB C…

100%1 / 154
Installation Manual Station Software Version 505.03
3.2.3 Station computer
3.2.3.1 Station computer HF, HF/3
Name
Simicro CPU076
CPU / clock frequency
PIII / 866 MHz or 1,26 MHz
RAM memory
192 MB
Hard disk
6 GB
CD-ROM drive
Yes
Floppy drive
3.5", 1.44 MB
Serial interfaces
2
Network
1 x 10/100Base-T
2 x 10Base-T
6-port hub
Table 3-2: Station computer hardware
3.2.3.2 Station computer S-25 HM, S-27 HM
Name
SCENIC N 300
CPU / clock frequency
PIV / 2.4 GHz
RAM memory
256 MB
Hard disk
40 GB
CD-ROM drive
Yes
Floppy drive
3.5", 1.44 MB
Serial interfaces
2
Network
1 x 10/100Base-T
1 x 10Base-T
Table 3-3: Station computer hardware
3.2.3.3 Station computer HS-50, HS-50+, HS-60
Name
SCENIC P 300
CPU / clock frequency
PIV / 2.6 GHz
RAM memory
256 MB
Hard disk
40 GB
CD-ROM drive
Yes
Floppy drive
3.5", 1.44 MB
Serial interfaces
2
Network
1 x 10/100Base-T
2 x 10Base-T
6-port hub
Table 3-4: Station computer hardware
16 of 154
Installation Manual, Station Software Version 505.03 Edition 04/2005
3.2.4 Machine controller
3.2.4.1 Machine controller HF, HF/3
Name
Simicro CPU076
CPU / clock frequency
PIII / 566 MHz
RAM memory
64 MB
Hard disk
6 GB
CD-ROM drive
Yes
Floppy drive
3.5", 1.44 MB
Network
1 x 10/100Base-T
Table 3-5: Machine controller hardware
3.2.4.2 Machine controller S-25 HM, S-27 HM, HS-50, HS-50+, HS-60
Name
Sicomp AMS - M54
CPU / clock frequency
PI / 233 MHz
RAM memory
32 MB
Hard disk
504MB
CD-ROM drive
No
Floppy drive
3.5", 1.44 MB
Network
1 x 10/100Base-T
Table 3-6: Machine controller hardware
17 of 154
Installation Manual Station Software Version 505.03
4 Installation instructions
4.1 Installing the SIPLACE software
4.1.1 Requirements
You must have installed the Windows XP Professional operating system with service pack 2
before installing the station computer version 505 (see section
3).
Caution:
When installing the RMOS operating system (see section
4.4.3), it is imperative that the
installation disks for Version 505 or higher are used. If any other disks are used, the
machine will not boot.
Attention:
Please make sure that only the Siemens XP Professional Service Pack 2 is installed. The
modified Siemens XP Professional Service Pack 2 is based on Mircrosoft Windows XP Service
Pack 2. Please make sure that never Mircrosoft XP Professional Service Pack 2 is installed.
The default Windows display settings must be changed and the touchscreen must be calibrated.
You must be logged on as the
Administrator in order to be able to carry out this work.
18 of 154