Specification SIPLACE CF-Medium.pdf - 第28页
27 Technical D ata: Dimens ions and S et- Up C o nditions Value s Length 1587 mm Widt h excluding Waffle Pack Changer 2425 mm Widt h including Waff le Pack C h anger 2952 mm Height from t ransport t o warning lamp 1140 m…
26
Technical Data:
Connections
Connections and Energy Required
Main voltage requirement
230/400 V
∼ / 119/208 V∼
±
5%, 50/60 Hz
Power 1.9 kW
Circuit breaker 3 x 16 A
Power outage max. 20 ms
Compressed air requirements 5.5 - 10 bar, 400 Nl/min, ½" tube
Compressed Air Specification
Particles: max. particle size by density,
based on ISO/DIS 8573-1 Class
Particle size
Particle density
0.1 µm
0.1 mg/m³
Dew:
Pressure dewpoint
Dewpoint
Class 4
+ 3° C
Oil:
max. oil content
Particle density
Class 1
0.01 mg/m³
Pressure Supply
Power Supply:
3 m Cable with
CEKON-Connector 3 x 16A
PCB Transport-
direction
Signal Interface
LAN Supply
230 Inner Edge
Fixed Side of Transport
Feet
27
Technical Data:
Dimensions and Set-Up Conditions
Values
Length 1587 mm
Width excluding Waffle Pack Changer 2425 mm
Width including Waffle Pack Changer 2952 mm
Height from transport to warning lamp 1140 mm
Weight of basic module 1500 kg
Weight fully equipped excluding
Waffle Pack Changer 2000 kg
Weight fully equipped including
Waffle Pack Changer 2320 kg
Room temperature
Humidity
Between 15° and 35°C
30 - 80%, on average not higher
than 45%, so that no condensation
can ever form on the machine
Maximum noise development
74 dB
A
SIPLACE CF
1140
1140
252
252
740
740
1921
1921
2500
2952
1036
1036
1587
1587
350
Height of PCB transport
830
± 15 mm (standard)
900
± 15 mm (option)
930
± 15 mm (option)
950
± 15 mm (option) SMEMA
Foot height 120 mm
All units in mm
725
28
Description
Transporting
TransportingTransporting
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE CF
placement machine. Forks 2 m
long are required for a packed ma-
chine, 1.5 m for an unpacked one.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE CF,
make certain that the surface it is
placed on possesses the required
load bearing capacity.
Commissioning
CommissioningCommissioning
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
Monitor
Keyboard
Warning lamp
Component changeover tables.
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2150 mm
1850 mm
1600 mm
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor static characteristics on request)
Total weight of equipped machine 2 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine legs
a
)
9 kg/cm
2
a) Worst case scenario; 4 legs per machine installed, area per leg: 104 cm
2
.
SIPLACE CF with Transportbox
Footprints
PCB Transport Direction
Dimension of
Transport Box