818306-01_Recommended_mating_shafts_manual_en_web.pdf - 第11页

Recommended mating shafts HOLLOW SHAFT ENCODERS ww w .leinelinde.com 11 2.5 900 series 2.5.1 T aper hollow shaft with axial xing screw 2.5.2 Blind hollow shaft with axial xing screw 2.5.3 Blind hollow shaft with axial …

100%1 / 16
Recommended mating shafts
HOLLOW SHAFT ENCODERS www.leinelinde.com
10
2.4 800 series
2.4.1 Blind hollow shaft with axial xing screw
2.4.2 Blind hollow shaft with axial xing screw and keyway
2.4.3 Through-going hollow shaft with clamping ring
2.4.4 Taper hollow shaft with axial xing screw
Dimensions [mm]
Ød Tolerance
12 js6
16 js6
Dimensions [mm]
Ød Tolerance
12 js6
Dimensions
Ød Tolerance
1 inch g6
25 mm g6
When a 53 mm mating shaft is used the recommend-
ed screw length is 16 mm. If the shaft is made shorter
the length of the screw must be prolonged accord-
ingly so that minimum 9 mm thread is in use.
When a 53 mm mating shaft is used the recommend-
ed screw length is 16 mm. If the shaft is made shorter
the length of the screw must be prolonged accord-
ingly so that minimum 9 mm thread is in use.
Recommended screw length 25 mm, minimum 8 mm
thread in use.
Recommended mating shafts
HOLLOW SHAFT ENCODERS www.leinelinde.com
11
2.5 900 series
2.5.1 Taper hollow shaft with axial xing screw
2.5.2 Blind hollow shaft with axial xing screw
2.5.3 Blind hollow shaft with axial xing screw and keyway
Recommended screw length 25 mm, minimum 8 mm
thread in use. Max screw head diameter 10,5 mm.
When a 53 mm mating shaft is used the recom-
mended screw length is 16 mm. If the shaft is made
shorter the length of the screw must be prolonged
accordingly so that minimum 9 mm thread is in use.
Max screw head and washer diameter 10,5 mm.
Recommended screw length 16 mm, minimum 9 mm
thread in use. Max screw head diameter 10,5 mm.
Min 44, max 53
Recommended mating shafts
HOLLOW SHAFT ENCODERS www.leinelinde.com
12
2.6 FSI 800 series
For mounting of the FSI 862 encoder with hollow shaft, the mating shaft is required to have dimensions as given.
2.6.1 For hollow shaft with keyway
2.6.2 For hollow shaft with key
Shaft material characteristics
Rm min 500 MPa
Rp 0,2 / Rel 300 MPa
Coefficient of
thermal expansion
10-12
*
10e-6
Shaft material characteristics
Rm min 500 MPa
Rp 0,2 / Rel 300 MPa
Coefficient of
thermal expansion
10-12
*
10e-6