TI2018-02Int01 (006).pdf - 第6页
For internal use onl y! ASM Ass embly S ystems Singapore P te Ltd S ubject to c hange without not ice 27.07.2018 535 Yishun Industrial Park A ASM TPB2 Singapore 768775 TI2018 - 02Int01 Se it e 6 - 19 ** If the m achine i…
For internal use only!
ASM Assembly Systems Singapore Pte Ltd Subject to change without notice 27.07.2018
535 Yishun Industrial Park A ASM TPB2
Singapore 768775 TI2018-02Int01 Seite 5 - 19
•
After then, you can remove the head board
plate and mount the new head holder plate
03169554-xx
** If the machine is Flex Configuration, DLM/PP
• Remove the MHCU and power module from
the old head interface board and mount it to
the new head interface board (03163875-xx)
with 4pcs of new M3x10 screws provided
** If the machine is Speed DLM Configuration
• Remove the power module from the old
head interface board and mount it to the new
head interface board (03164654-xx) with
2pcs of new M3x10 screws provided
Or
For internal use only!
ASM Assembly Systems Singapore Pte Ltd Subject to change without notice 27.07.2018
535 Yishun Industrial Park A ASM TPB2
Singapore 768775 TI2018-02Int01 Seite 6 - 19
** If the machine is Flex Configuration, DLM/PP
• Mount back the power module together
with 03163875-xx onto head board plate
• Tightening 2pcs M3 x 50mm screws and
2pcs M3 x 30mm screws provided
• Tightening 2pcs M3 x 10mm screws
provided for 2 new additional mounting
holes
** If the machine is Speed DLM Configuration
• Mount back the power module together
with 03163875-xx onto head board plate
• Tightening 2pcs M3 x 30mm screws
provided
• Tightening 2pcs M3 x 10mm screws
provided for 2 new additional mounting
holes
Or
** If the machine is Flex Configuration, DLM/PP
• Mount back the VHI and head board.
Replace the original 7pcs of M3x40
standoffs with new standoffs provided.
Connect back all the cables and connectors
and secure them well.
** If the machine is Speed DLM Configuration
Or
For internal use only!
ASM Assembly Systems Singapore Pte Ltd Subject to change without notice 27.07.2018
535 Yishun Industrial Park A ASM TPB2
Singapore 768775 TI2018-02Int01 Seite 7 - 19
•
Mount back the VHI and head board.
Replace the original 7pcs of M3x40
standoffs with new standoffs provided.
Connect back all the cables and connectors
and secure them well.
• Mount back the head board cover
Note: Ensure all M3 x 5mm Button Head screws
(7pcs) and standoffs are tightening properly.
• Power up machine and resume production
run.
Or
4.2 New Low Voltage Fusing Board Design
Parts required:
03107946-05 Low Voltage Fusing board 1pc
(use only FS05 parts, please see picture on
the right to differentiate between the old and
new board)