M6e_ServiceManual_e.pdf - 第28页

1 Installation 1-20 - - Blank Page - -

1 Installation

1-19

Sequence of Sending PC board (SMEMA Interface spec.)

① When the machine is ready to send PC board, the Request Transfer (Board Available) is sent to

Post-process machine.

② The transfer belt will be activated when the Permit Transfer (Machine Not Ready) is received from

Post-process machine and the Request Transfer is sent.

③ The transfer belt will be deactivated and the Request Transfer will be sent-off when the Exit Sensor

turns off after the sensor turned on at the PC board arrival and it passed under the sensor.

④ “Conveyor Trouble” error happens if the Permit Transfer does not receive-off.

⑤ Pressing START button restarts the operation paused by the error.

1 Installation

1-20

- - Blank Page - -

2 Periodical Checks

2-1

Periodical Checks