M6e_ServiceManual_e.pdf - 第63页

3 Mechanical Section 3-29 ■ Lubrication Points for M X-20 (Option)

3 Mechanical Section

3-28

■ Application of grease on a Nozzle Holder

ACTION:

① Rub the inside of the Nozzle Holder with materials like a dry cotton swab to clean out the grime, such

as old grease.

② Use the head vacuum breaker to blow out the dust, such as fibers from a cotton swab.

NOTE: The head vacuum breaker can be executed by clicking the button at required head on the window of Main

Menu > Manual Menu > Actuator > On/Off > Head Vacuum.

③ Apply silicon grease evenly on the new cotton swab and rub the inside of the Nozzle Holder softly and

evenly with it.

④ After grease is applied, insert a nozzle and confirm that the nozzle escaping works smoothly.

Nozzle holder

Cotton Swab

3 Mechanical Section

3-29

■ Lubrication Points for MX-20 (Option)

3 Mechanical Section

3-30

■ Lubrication Points for MXR-20 (Option)

Linear Shaft

Ball Screw