00195011-01.pdf - 第15页

Installation Manual, Station Software Version 408.01 Edition 03/2006 4.1.1.2 Calibrating the touchscreen Select Start Æ Settings Æ Control Panel Æ Elo to go to EloTouchscreen Properties : Fig. 4-2:Elo Touchscreen propert…

Installation Manual Station Software Version 408.01

4.1.1.1 Changing the screen settings

→ Select Start Æ Settings Æ Control Panel Æ Display.

→ Click the Settings tab.

→ Make the following settings here:

Fig. 4-1: Screen settings

14 of 104

Installation Manual, Station Software Version 408.01 Edition 03/2006

4.1.1.2 Calibrating the touchscreen

Select Start Æ Settings Æ Control Panel Æ Elo to go to EloTouchscreen Properties:

Fig. 4-2:Elo Touchscreen properties

→ Click the Kalibrationsdaten tab.

→ Then click the Kalibrationsdaten button. The following message then appears:

Fig. 4 -3 Selection window for the screen to be calibrated

→ Touch the display you wish to calibrate.

A new screen is displayed on which you can perform a calibration.

→ Repeat this procedure for the second screen (on HS and HF machines).

→ Click the OK button to accept the data.

15 of 104

Installation Manual Station Software Version 408.01

4.1.2 Definitions

4.1.2.1 Initial installation

The first time the station software is installed on a SIPLACE placement machine is known as the

initial installation.

4.1.2.2 Update

If an initial installation has already been performed and a more recent release version of the

station software is to be loaded, then this procedure is referred to as an update.

The release version is identified by the last two digits of the complete version number.

4.1.2.3 Upgrade

The range of functions of the software is indicated by the three digit number contained within the

complete version number.

Example:

408.01 = The number 408 identifies the software functions

The number 01 is the release version 1.

The installation of a software version with a version number higher than the existing, installed

version is known as an upgrade procedure.

Example:

Changing software from 407.01 to 408.01 = upgrade

16 of 104