00198765-01_VD_713.0_R19-2_EN_DE.pdf - 第20页
Station Software 713.0 (R19-2) / Version Description 11/2019 Edition 20 9 Important Terms and Abbreviations CA4 CA4 V2 Machine type of the Chip A ssembly (CA)-series with 4 gantries and 2 PAs C&P Collect & Place …
Station Software 713.0 (R19-2) / Version Description 11/2019 Edition
19
8 Corrected Errors
713.0 Station Software
The 713.0 station software version contains all error corrections of the previous 7xx versions.
Additionally, the following errors have been corrected in this version:
Error no.
Error description
G50029635
Standard nozzle 4102 cannot pick up component 008004.
G50030588
Machine stops when teaching component, tray height 40 mm.
Table 8-1: Corrected errors station software version 713.0
Station Software 713.0 (R19-2) / Version Description 11/2019 Edition
20
9 Important Terms and Abbreviations
CA4
CA4 V2
Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P
Collect & Place
CPP
Collect & Place & Pick & Place
DC
Dual Conveyor
DX1/DX2
Machine type with 1 or 2 gantries and 1 PA
DX4
Machine type with 4 gantries and 2 PAs
E1 L
E1 R
Machine type with 1 gantry and 1 PA
EDIF
Electronic Design Interchange Format
eWLP
embedded Wafer Level Process
FOPLP
Fan-Out Panel Level Packaging
FCCS
Field Camera Calibration System
GUI
Graphical User Interface
HFH
High Force Head
HW
Hardware
MGCU
Modular Gantry Control Unit
MHCU
Modular Head Control Unit
MTC
Matrix Tray Changer
OIS
Operator Information System
PA
Processing area
PCB
Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode, it is possible to
perform manual operations for one side / gantry. This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC
Single Conveyor
SC
SIPLACE Setup Center (external setup control system)
SW
Software
SWS
SIPLACE Wafer System
Station Software 713.0 (R19-2) / Version Description 11/2019 Edition
21
SX1/SX2
Machine type with 1 or 2 gantries and 1 PA
SX4
Machine type with 4 gantries and 2 PAs
TH
Twin Head
TH HF
Twin Head High Force
Twin VHF
Very High Force Twin Head
TX1/TX2/TX2i
Machine type with 1 or 2 gantries and 1 PA
TX1/TX2 V2
TX2i V2
Machine type with 1 or 2 gantries and 1 PA
TX2i V2 W
Machine type with 2 gantries and 1 PA and wide transport
TX2 micron/
TX2i micron
TX2i micron 15 µm
Machine type with 2 gantries and 1 PA
VC
Vision computer
VCU
Vision Control Unit
WLFO
Wafer Level Fan-Out, Chip Assembly process
WPC
Waffle Pack Changer
X2/X2 S
Machine type with 2 gantries and 2 PAs
X3/X3 S
Machine types with 3 gantries and 2 PAs
X4/X4 S
Machine types with 4 gantries and 2 PAs
X4i/X4i S
Machine types with 4 gantries and 2 PAs