YG100R_Ope_E.pdf - 第44页
1-16 1 Part names and functions 5 . Pa l l e t i n d i c a t o r l a m p T h e i n d i c a t o r l a m p f o r t h e p a l l e t N o . s e t i n t h e p a r t s i n f o r m a t i o n i s l i t u p . W h e n t h e t r a y…
1-15
1
Part names and functions
4.2.2 sATS main unit
Major part names and their functions of sATS are explained below.
sATS main unit
Pallet insertion side
1. Magazine door
2. Emergency stop button
3. DOOR switch
4. DOOR indicator lamp
5. Pallet indicator lamp
23125-M1-00
1. Magazine door
Open this door when exchanging a pallet or a magazine. Two magazines (Magazine 1, Magazine 2) can be
accommodated vertically.
2. Emergency stop button
Pressing this button triggers emergency stop, the same as the emergency stop buttons on the mounter.
3. DOOR switch
Placing this switch in "MAGAZINE 1" or "MAGAZINE 2" unlocks the magazine door, so you can open it. When this
switch is in the RUN position, the door is locked and you cannot open it.
Place this switch in "MAGAZINE 1" when exchanging Magazine 1, and in "MAGAZINE 2" when exchanging Magazine 2.
4. DOOR indicator lamp
This indicator lamp lights up when the magazine door is locked and turns off when unlocked.
1-16
1
Part names and functions
5. Pallet indicator lamp
The indicator lamp for the pallet No. set in the parts information is lit up. When the tray components on a pallet are used
up, the indicator lamp for that pallet No. flashes (see below). Pallet indicator lamps No. 1 to No. 15 are for Magazine 1.
Pallet indicator lamps No. 16 to No. 30 are for Magazine 2.
After you set new pallets in the magazines, press the flashing indicator buttons to reset them.
n
Relation between pallet indicator numbers and magazines
Pallet indicator number Magazine
1 to 15 Magazine 1 for stage 1
16 to 30 Magazine 2 for stage 1
n
Pallet indicator lighting pattern
Pallet condition Component condition Indicator status
One component type on one pallet
Components have been supplied. ON
Used up all components. Flashing
Components are currently being used. ON
Two or more components types on
one pallet
All components on pallet have been supplied. ON
Used up all components. Flashing
Used up at least one type of component. Flashing
Components to be used are not specified in board data. OFF
1-17
1
Part names and functions
4.2.3 wATS main unit
The wATS is installed in the rear of the surface mounter. Major part names and their functions of sATS are
explained below.
wATS main unit
Mounter rear side
1. Magazine door
(stage 1)
5. Pallet indicator
2. Magazine door
(stage 2)
4. Door switch
3. Emergency stop button
23126-M1-00
1. Magazine door (stage 1)
Open this door when replacing a pallet or a magazine on stage 1. The upper door is for Magazine 1 and the lower door
is for Magazine 2.
2. Magazine door (stage 2)
Open this door when replacing a pallet or a magazine on stage 2. The upper door is for Magazine 1 and the lower door
is for Magazine 2.
3. Emergency stop button
Pressing this button triggers emergency stop, the same as the emergency stop buttons on the mounter.
4. Door switch
Placing this switch in "OPEN" unlocks the magazine door, so you can open it. When this switch is in "CLOSE", the door
is locked and the door switch lamp lights up. The door switches for stage 1 and stage 2 can be operated independently.