A10011-ASM-T45-EN-Spec-E_DMS.pdf - 第25页

25 Component Feeding SIPLACE JTF-MW Technical Data Description JTF-MW Dimensio ns Width 322.40 mm Height 946 mm Length 1209 mm Location on E by SIPLACE Installed / docked at location 2 only JEDEC waffle pack tray specifi…

100%1 / 56
24
Component Feeding
SIPLACE JTF-MW
The SIPLACE JTF-MW is an
automatic and fast changer
for standard JEDEC waffle
pack trays. On E by
SIPLACE machines, a JTF-
MW tray feeder can be
installed on a changeover
table. The JTF-MW can be
remove with the changeover
table for quick change over.
The SIPLACE JTF-MW
occupies a fixed area of
tracks on the changeover
table.
The SIPLACE JTF-MW
stores up to 30 JEDEC waffle
pack trays in an cassette and
supplies them as
required.The placement
machine can therefore be
supplied with different com-
ponent types at variable
changeover times.
JTF-MW
Changeover table
25
Component Feeding
SIPLACE JTF-MW
Technical Data
Description JTF-MW
Dimensions
Width 322.40 mm
Height 946 mm
Length 1209 mm
Location on E by SIPLACE
Installed / docked at location 2 only
JEDEC waffle pack tray specification
JEDEC Standard: 95-1 & IEC 60286-5
Storage capacity
30 JEDEC waffle pack trays
15 cookie trays, each can hold 2 JEDEC trays
Max component height from tray base
10.8 mm (zero tray level skipping)
24.6mm (1 tray level skipping)
38.4mm (2 tray level skipping)
Cassette
Dimensions (L x W x H) 344 mm x 300 mm x 228 mm
Total weight loading
30 kg
(cookie tray + components)
Max. weight per cookie tray
2.0 kg ± 10%
Max. tray size when not using JEDEC
304mm x 274mm for component +tray height >11mm
Pneumatics
5 bar to 10 bar
Compressed air consumption
28.3 NL/min.
Communication
Pogo-pin interface, Can bus
Weight
~ 45 kg excluding cookie trays & magnets
~ 60 kg including 15 cookie trays & magnets
26
Component Feeding
Alternative Feeder Modules
SIPLACE StickFeeder E
SIPLACE StickFeeder E
The SIPLACE StickFeeder E for E by SIPLACE
can be used on any E by SIPLACE feeder table
and can setup any number of stick / tube, with a
combined stick width up to 100 mm. The Stick-
Feeder for E by SIPLACE will occupy 10 tracks
on the feeder table and allows handling of sticks
up to a thickness of 23 mm (standard). Please
contact your dedicated E by SIPLACE distribu-
tor for stick thickness higher than 23 mm.
SIPLACE Component
Reject Conveyor E
SIPLACE Component Reject Conveyor E
The SIPLACE Component Reject Conveyor E
is designed so that defective components (veri-
fied by placement machine vision system) are
placed onto conveyor belt and transferred out of
machine for operator retrieval. It is handled like
any other feeder for E by SIPLACE and can be
mounted onto its feeder tables.
Bowl Feeder