A10011-ASM-T45-EN-Spec-E_DMS.pdf - 第42页
42 Technical Data Electrical Ratings, Energy Consumption and Compressed Air supply Electrical ratings Supply voltage Fuse Main power supply 3 x 200 V~ up to 3 x 23 0 V~; ± 10 % ; 50/60 Hz) a 3 x 380 V~ up to 3 x 415 V~; …
41
SIPLACE Software Suite
SIPLACE Station Programming
In the SIPLACE Station
Programming mode, the
user can create a place-
ment program (PCB, com-
ponents, component
shapes, setup) directly at
the placement machine.
The specified fiducials and
placement positions are
exactly measured by the
PCB camera.
After a local optimizing run,
the placement process can
be started at the station.
In this case, the placement
machine can be used inde-
pendently without a net-
work connection to a
programming system.
For a manual data exchange,
the placement programs can
be exported from the place-
ment machine or imported
into the placement machine.
In order to implement the sta-
tion programming mode, the
SIPLACE Pro software
including the SQL database
is integrated on the station
computer. The layout of the
SIPLACE Pro GUI has been
adapted to the look and feel
of the station software GUI
and is displayed as SIPLACE
E Pro desktop in the station
software.
Job Editor
The SIPLACE E
Pro provides the
user at the station
with all means that
are required for a
complete descrip-
tion of the place-
ment program.
Line Configuration
Each machine in the network
automatically registers in the
masterPC and is available
for creating a line. Lines can
be: independent machines, a
physical line or a virtual line.
Job Control
Job Control shows the status
of each machine of the cur-
rent line configuration and
manages the correct down-
load to the right machines of
the configured line.
or
42
Technical Data
Electrical Ratings, Energy Consumption and
Compressed Air supply
Electrical ratings
Supply voltage Fuse
Main power supply 3 x 200 V~ up to 3 x 230 V~; ± 10 %; 50/60 Hz)
a
3 x 380 V~ up to 3 x 415 V~; ± 10 %; 50/60 Hz
a) with adapter kit (US option)
3 x 16 A characteristic C
3 x 16 A characteristic C
Mains power connection Cable 4 x 4 mm² with CEKON connector
Energy consumption
Energy consumption
with
vacuum pump
Nominal active power 1.8 kW
Nominal apparent power 2.3 kVA
Compressed air supply
Compressed air pressure values
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air connection R 3/4" inner thread (pipe thread) with 1/2" hose connection
Ambient conditions for packaging, transportation and storage
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization
Ambient conditions for machine operation
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75 % (no higher than 45% on average to prevent any possibility of
condensation on the machine)
Ambient pressure > 890 mbar (corresponds to 1000 m above mean sea level)
Compressed air consumption
a
a) Average consumption values
Placement head configura-
tion
Compressed air consumption
b
with
vacuum
pump
c
b) Under normal atmospheric conditions at 20°C and 1013 hPa.
c) Vacuum pump for SIPLACE CP14/CP12/CP6 head only.
E by SIPLACE CP14
CP12
CP12 / PP
CP6 / PP
TH
90 Nl/min
90 Nl/min
140 Nl/min
140 Nl/min
185 Nl/min
Compressed air specification according to DIN ISO 8573-1:2010
Particle size (ISO class 1) 0.1 µm
Particle density (ISO class 1) 0.1 mg/m³
Maximum oil content (ISO class 1) 0.01 mg/m³
Pressure dewpoint (ISO class 4) + 3°
43
Technical Data
Dimensions and Setup Conditions
Length of the machine
E by SIPLACE
E by SIPLACE with LBO1200
1500 mm
1910 mm
Width of the machine
E by SIPLACE 1666 mm
Height of the machine
with indicator lamp
With folded-up protective covers
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
max. 1760mm
1750 mm
1780 mm
1800 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
120 mm ± 15 mm
150 mm ± 15 mm
170 mm ± 15 mm
Weight of E by SIPLACE
Single sided
Double sided
1850 kg
2050 kg
Weight of component table
Changeover table 60
Changeover table 60 (fully configured)
Fixed table 60
Fixed table 60 (fully configured)
88 kg
138 kg
53 kg
104 kg
Floor space for E by SIPLACE
Single sided with 1 x changeover table 60
Double sided with 2 x changeover table 60
2.835 m²
3.338 m²
Floor stiffness
Minimum vertical floor stiffness
Recommended vertical floor stiffness
0,5E8 N/m
≥ 1,5E8 N/m
The load per unit area calculation included an additional working space of 0.5 m on each side
of the machine.
Load per unit area for E by SIPLACE
Single sided
Double sided
5.02 kN/m²
5.04 kN/m²
Number of machine feet 4