A10011-ASM-T45-EN-Spec-E_DMS.pdf - 第44页
44 Technical Data Placement System Dimensions Placement System Center of Gravity X = 0 mm Y = 0 mm Z = 721 mm
43
Technical Data
Dimensions and Setup Conditions
Length of the machine
E by SIPLACE
E by SIPLACE with LBO1200
1500 mm
1910 mm
Width of the machine
E by SIPLACE 1666 mm
Height of the machine
with indicator lamp
With folded-up protective covers
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
max. 1760mm
1750 mm
1780 mm
1800 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
120 mm ± 15 mm
150 mm ± 15 mm
170 mm ± 15 mm
Weight of E by SIPLACE
Single sided
Double sided
1850 kg
2050 kg
Weight of component table
Changeover table 60
Changeover table 60 (fully configured)
Fixed table 60
Fixed table 60 (fully configured)
88 kg
138 kg
53 kg
104 kg
Floor space for E by SIPLACE
Single sided with 1 x changeover table 60
Double sided with 2 x changeover table 60
2.835 m²
3.338 m²
Floor stiffness
Minimum vertical floor stiffness
Recommended vertical floor stiffness
0,5E8 N/m
≥ 1,5E8 N/m
The load per unit area calculation included an additional working space of 0.5 m on each side
of the machine.
Load per unit area for E by SIPLACE
Single sided
Double sided
5.02 kN/m²
5.04 kN/m²
Number of machine feet 4
44
Technical Data
Placement System Dimensions
Placement System Center of Gravity
X = 0 mm
Y = 0 mm
Z = 721 mm
45
Technical Data
Maneuvering Radii for the Component Trolleys
Location 1 / Location2
Maneuvering radius R 700 mm
Distance L1: Machine center to outer edge of changeover table 1205 mm
Distance L2: Machine center to wall 1905 mm