5OM-1840-001w_F8S.pdf - 第52页
5OM-1840 1604-001 Cont-1 Contents Page Chapter 1 Pneumatic and Mounting Diagrams Entire System (Pneumatic Diagram) ................................................ 1-1-1 Main Body (Pneumatic Diagram) ....................…
Safety Precautions
Safe-42
1OM-1840
1604-001
Handling solvents (including solder and adhesive)
Cleaning organic solvents, such as isopropyl alcohol (IPA) and ethanol are used for the
maintenance of this machine (including optional units). Additionally, the solder paste
printers, dispensers, and some hybrid placers and ip bonders use solder, ux, or bond,
etc. during normal production. Since many of these materials include organic solvents,
great care should be taken when handling them.
Cautions on handling solvents
1. Hazards to human health
Organic solvents constantly vaporize and contaminate the surrounding atmosphere.
Inhaling or coming in contact with organic solvent vapor may cause serious damage to
human health.
2. Flammability
Organic solvents are highly ammable substances and can easily catch re if handled
improperly.
3. Adverse effects on machines
Some kind of solvent may deteriorate parts used in the machine, electric cable sheathes,
and other resin parts.
To avoid hazards of solvents
1. Be careful not to inhale toxic vapors of solvents for extended periods.
2. Do not use solvents near re or ame. Keep solvents away from ame or re.
3. Use only the specified solvent in the correct manner. Do not reuse any solvent
repeatedly, and do not mix with other solvents or chemicals.
4. Check the contents of the safety data sheet (MSDS/SDS), thoroughly notify work
personnel of toxicities of included chemical materials and measures to be taken in case
of an accident, and take necessary countermeasures.
5. Use appropriate safety gear (safety goggles, protective gloves, and respiratory
protective devices) corresponding to the solvent or material types.
Note
If no safety data sheets are supplied with solvents or materials you have purchased,
be sure to acquire the safety data sheets from the suppliers.
6. Precautionary Items for Correct Operations
5OM-1840
1604-001 Cont-1
Contents
Page
Chapter 1 Pneumatic and Mounting Diagrams
Entire System (Pneumatic Diagram) ................................................ 1-1-1
Main Body (Pneumatic Diagram) ..................................................... 1-1-2
Main Body (Pneumatic Diagram) ..................................................... 1-1-3
Main Body (Mounting Diagram) ....................................................... 1-1-4
Main Body (Mounting Diagram) ....................................................... 1-1-5
Conveyor (Pneumatic Diagram) ....................................................... 1-1-6
Conveyor (Mounting Diagram) ......................................................... 1-1-7
Conveyor (Mounting Diagram) ......................................................... 1-1-8
Positioning Unit (Pneumatic Diagram) ............................................. 1-1-9
Positioning Unit (Mounting Diagram) ............................................... 1-1-10
Nozzle Stocker (Pneumatic Diagram) .............................................. 1-1-11
Nozzle Stocker (Mounting Diagram) ................................................ 1-1-12
Head Unit (Pneumatic Diagram) ...................................................... 1-1-13
Head Unit (Mounting Diagram) ........................................................ 1-1-14
Feeder Base (Pneumatic Diagram).................................................. 1-1-15
Feeder Base (Mounting Diagram) .................................................... 1-1-16
Chapter 2 Sensor and Load Layout
Layout under the Base ..................................................................... 2-1-1
Panel Layout .................................................................................... 2-1-2
Cover Layout .................................................................................... 2-1-3
5OM-1840
1604-001 Cont-2
Contents
Page
Chapter 3 Parts Location
Layout under the Base (General View) ............................................ 3-1-1
Drawing for the General Electrical Blocks ........................................ 3-1-2
Front 3-1-3
Power Breaker ................................................................................. 3-1-4
Noise Filter ....................................................................................... 3-1-5
Lighting Control PCB UC19 ............................................................. 3-1-6
Servo Amplitier (Front) ..................................................................... 3-1-7
CPU1................................................................................................ 3-1-8
CPU2................................................................................................ 3-1-9
REAR ............................................................................................... 3-1-10
Relay PCB........................................................................................ 3-1-11
Intensive PCB UC18 ........................................................................ 3-1-12
Servo Amplier (Rear) ...................................................................... 3-1-13
DC Power Supply Unit ..................................................................... 3-1-14
SIDE A .............................................................................................. 3-1-15
Side Panel (Inside) ........................................................................... 3-1-16
Side Panel Front (Outside)............................................................... 3-1-17
Side Panel Center ............................................................................ 3-1-18
Side Panel Rear (A Side) ................................................................. 3-1-19
Side Panel Rear (B Side) ................................................................. 3-1-20
SIDE B ............................................................................................. 3-1-21
Transfer Panel .................................................................................. 3-1-22
Vacuum Pump .................................................................................. 3-1-23