SIPLACE TX V2 micron 设备性能参数_DMS.pdf - 第14页
14 Board conveyor I-Placement Alternating placement mode Alternating placement or I-Placement mode Distance of outer conveyor edges: 562 mm, 2 lanes, outer conveyor edges fixed Alternating placement mode Distance of oute…
13
Board conveyor
Technical data
Dual conveyor (standard) Dual conveyor in
"single conveyor"
(optional) mode
Board dimensions (width
a
x length)
a) When using PCB widths > 375 mm, make sure that the peripheral modules can also process these PCB widths.
Standard 45 mm x 50 mm to
260mm x 375mm
45 mm x 50 mm to
460mm x 375mm
Placement accuracy 20 µm (3) 45 mm x 50 mm to
260mm x 375mm
--
Placement accuracy 15 µm (3) 50 mm x 50 mm to
250mm x 100mm
--
Stationary conveyor side Outer /outer
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
Board thickness
Standard 0.3 mm to 4.5 mm
Board warpage See page 15
Board weight
b
Standard
b) The PCB weight value refers to the weight of the PCB plus the weight of the components.
Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 33 mm
Board conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
Board changeover time
Dual conveyor 1.3 seconds
c
0 seconds
d
c) With the "Convoy Mode" option. Without this option 1.8 seconds.
d) 0 seconds in asynchronous mode
Key information for machines in combination with SIPLACE TX m:
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX m, be aware that there is limited room between
the two machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the operator between the two
machines.
IPC-Hermes-9852
A protocol for advanced development of Industry 4.0 in electronics production
The Hermes Standard, also published as IPC-HERMES-9852, is a non-proprietary open protocol,
based on TCP / IP and XML. This boosts the exchange of PCB-relevant data between the various
machines in the electronics production lines. The Hermes Standard was initiated, developed and
established and is still managed by a group of leading equipment manufacturers, who share their
know-how to achieve a significant step towards advanced process integration. It has been recognized
by IPC as the next generation solution for IPC-SMEMA-9851, normally known as "SMEMA standard".
The founding and defining body The Hermes Standard Initiative is available to all equipment providers
wanting to actively participate in using the benefits of Industry 4.0 for their customers.
14
Board conveyor
I-Placement
Alternating placement mode
Alternating placement or
I-Placement mode
Distance of outer conveyor
edges: 562 mm, 2 lanes, outer
conveyor edges fixed
Alternating placement mode
Distance of outer conveyor
edges: 562 mm, 2 lanes, right
conveyor edges fixed
a
Alternating placement mode
Distance of outer conveyor
edges: 460 mm, dual conveyor
in single conveyor mode, right
conveyor edge fixed
a
Max. 260
Movable conveyor side
Stationary conveyor side
a) The diagram only shows settings with a fixed righthand conveyor edge. A setting with the stationary conveyor
edge on the left is also possible. All dimensions in millimeters.
Max. 260
281
562
Min. 35
281
179
Max. 260
281
Min. 35
Max. 260
562
Max. 460
Adjustable conveyor side position and max. PCB width
Conveyor side position Max. PCB width Distance of fixed sides to one another, for various fixed
side position settings
Outside Right or left
234.2 mm 216 mm 468.4 mm 251.7 mm
268 mm SMEMA 250 mm 536 mm 285.5 mm
281 mm SMEMA 260 mm 562 mm 298.5 mm
Machine center
Machine center
Machine center
15
Board warpage
Board warpage across the direction of travel
max. 1% of the PCB diagonal, but not
exceeding 2 mm.
Board warpage on the conveyor
Fixed clamped edge
Movable clamping device
Boar
Fixed clamped edge
Conveyor belt
Board transport direction
Front PCB edge
Front PCB edge
Board warpage in direction of travel + PCB thickness < 5.5 mm
Bending up of front PCB edge max. 2.5 mm
Left conveyor belt
Right conveyor belt
Board transport direction