SIPLACE TX V2 micron 设备性能参数_DMS.pdf - 第33页
33 Technical data Electrical connection and compressed air 1 = Electrical c onnection 2 = Compressed air connectio n The connections are run into the machine from below and then co nn ected to the power supply or pneumat…
32
Technical data
Compressed air supply
Compressed air supply
Compressed air pressure val-
ues
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air connection 1/2" hose connection
Compressed air consumption
a
a) Average consumption values. Under normal atmospheric conditions at 20°C and 1013 hPa.
Placement head configura-
tion
Compressed air
consumptionwith
vacuum pump
b
b) Vacuum pump for C&P20 M3 head only.
Compressed air con-
sumption without vac-
uum pump
c
c) Optional
SIPLACE TX m C&P20 M3/C&P20 M3
CPP M/CPP M
C&P20 M3/ / CPP M
120 Nl/min
No option
190 Nl/min
No option
260 Nl/min
190 Nl/min
Compressed air specification according to ISO 8573
Particle size (ISO class 3) 5 µm
Particle density (ISO class 3) 5 mg/m³
Maximum oil content
(ISO class 1)
Particle density 0.01 mg/
m³
Pressure dewpoint (ISO class 4) Dewpoint + 3°
33
Technical data
Electrical connection and compressed air
1 = Electrical connection
2 = Compressed air connection
The connections are run into the machine from below and then connected to the power supply
or pneumatic unit terminals.
Please note:
Also observe the document "Network and compressed air configuration for SMD systems" (Ger-
man+English, item no. 00197548-xx), which is supplied with your SIPLACE machine.
34
Technical data
Dimensions and setup conditions
Length
a
Without conveyor extension and with hand guard
With input conveyor extension
b
With output conveyor extension
With input and output conveyor extension)
a) Measured at the outer contour of the machine protection.
b) Only at the first machine in the line.
1000 mm
1260 mm
1604 mm
1864 mm
Width
Outer contour of machine protection (both tables "inside")
With monitor
Outer contour of machine protection (table location 1 "outside")
With monitor
2232 mm
2420 mm
2347 mm
2441mm
Height of machine (for PCB conveyor height 950 mm)
Machine protection closed
With 2-color indicator lamp
With 3-color indicator lamp
Without indicator lamp (height of packaging)
With folded-up short protective cover 45 degrees position
With folded-up short protective cover 60 degrees position
With folded-up short protective cover 45 degrees position
With folded-up short protective cover 60 degrees position
1500 mm
1690 mm
1735 mm
1500 mm
1960 mm
2070 mm
2050 mm
2175 mm
Machine ground clearance for TX m
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
120 mm ± 13 mm
150 mm ± 13 mm
170 mm ± 13 mm
Weight
SIPLACE TX m (without feeder modules)
SIPLACE TX m (fully equipped with feeder modules)
2050 kg
2150 kg
Location
c
With tables in outer position
c) Measured at the outer contour of the machine protection and without conveyor extension.
2.23 m²
2.33 m²
Even floor surface load (without feeder module)
Even floor surface load(with feeder module)
Characteristic surface load
6.46 kN/m²
6.79 kN/m²
7.70 kN/m²
Number of machine feet 4
Max. noise emissions 75 dB (A)
Atmospheric humidity 30% to 75% (no higher than 45%
on average to prevent any possi-
bility of condensation on the
machine)