Specification_SIPLACE_S23HM_eng.pdf - 第14页

13 Description The SIPLACE Bulk Case feeder with 2 tracks is us ed to handle bulk material. It fe eds rectangula r and round passive components. To refill, the Bulk Cas es ar e ex- changed, simply and without ma- chine i…

Description

The tape reels of the feeder mod-

ules are accommodated in the

tape container of the component

changeover table. A cutter auto-

matically chops up empty tape

when it comes out.

Feeder modules used on SIPLACE

are distinguished by a short cycle

time and a highly accurate pick-up

position. Product diversity and

small batches sizes are also easily

managed, since changeover of the

modules can be handled quickly:

The increment of the tape cycle is

just as variable as the use of tape

materials. Thanks to the general

purpose tape feeder modules

which are equally suitable for pa-

per and blister tapes, a small range

of module types is sufficient. This

is a decisive advantage for invest-

ment and logistics. Once activated

by a signal from the component

table, the modules control the en-

tire feeder operation of the auto-

matic strip removal all by them-

selves.

The S Feeders series feature

shorter cycle times and they can

handle tapes with 2 mm grids

(8 mm S). 8 mm S and

12/16 mm S are equipped with

component cover.

Component Supply:

Tape Feeder

24 / 32 mm S

12 / 16 mm S

2 x 8 mm S

Technical Data

Packaging Model Feeder

locations

Transport

distance

Max. compo-

nent height

Paper and

blister tapes

2 x 8 mm S*

12 / 16 mm S

2 or 4 mm

4 - 12 mm**

2.5

Blister tape 24 / 32 mm S 1.5 4 - 32 mm** 14

Tape rolls

7" to 15" (178 - 381 mm)

Feeder cycle S-feeder 8 mm: 60 ms

* Reference mark to recognize the position of the feeder

** adjustable in increments of 4 mm

Tape Feeder Module S

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

bulk material. It feeds rectangular

and round passive components.

To refill, the Bulk Cases are ex-

changed, simply and without ma-

chine idle time.

The module essentially consists of

the basic element and the proper

feeder rail and Bulk Case based on

component type and height. The

components are separated and fed

by means of compressed air.

The principle of the stationary

components tables proves its

worth precisely when Bulk Cases

are used. For example, wear which

occurs during vibrations associated

with other placement concepts can

greatly impair the component

quality.

The stationary component table

also brings decisive advantages in

the case of stick magazines: The

general purpose vibratory feeder

can be refilled during placement.

Component Supply:

Bulk Case Feeder, Stick Magazine Feeder

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Magazine

Feeder Type III

Technical Data

Bulk Case feeder*

Packaging form Bulk Case

Feed rails for: Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different compo-

nent types

Stick magazine feeder Type III with control electronics

Number and width of tracks 3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1 feeder location

* Reference mark to recognize the position of feeder

Danger

Some local safety requirements

dictate that all feeder locations

must be equipped with feeders.

If the feeder set-up does not fill all

feeder locations, guards (dummy

feeders) may be used in place of

the modules.

Component Supply:

Dummy Feeder

The following dummy feeder variants can be used:

Item no. 00116961-01

Item no. 00116962-01

Item no. 00116963-01

SIPLACE guard for 1 location

SIPLACE guard for 6 - 10 locations

SIPLACE guard for 11 - 20 locations

Various Dummy Feeders