IPS adjustment on the modules.pdf - 第20页

E dition 1 .0 IPS Adjustment for V arious H ead T ypes on the Module < H24 head > FK - 9F50 - 74 - 0E 1-8 FUJI CORPORA TION 5. Use the bolt s below to adjust the camera po sition s o that the center value, resoluti…

100%1 / 172
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-7 FUJI CORPORATION
Adjusting t he Ca m e ra Installation Position
1. Check that the R-axis is at the calibration data position (Reference value：30000 ±
3000 pulses) .
Note: Be sure to keep this positi on while a djusting the IPS cam er a posit i on.
2. Press and hold the low er button for a few s econds to shift to “ADJ MODE”.
3. Press the lower button to shift to “ADJUSTMENT 1” and LED lamp flashes.
4. Adjus t t he position of the camera so that the jigs on the B and X holders match up with
the green frames on the screen.
The jigs match the
green frames on the
screen.
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-8
FUJI CORPORATION
5. Use the bolts below to adjust the camera position so that the center value, resolution
and tilt are al l w ithin t olerance.
Inspection item
Tolerance
Target value
Camera resolution
L: X = 92~ 108
L: Z = 92~108
Same as tolerance
Center val ue
R: Xs = 380~400, Zp = 235~255
L: Xp = 80~ 100, Zp = 237~253
R: Xs = 390, Zp = 245
L: Xp = 90, Zp = 245
Tilt
R: dX = 0~6, dZ = 0~ 9
L: dX = 0~ 6, dZ = 0~9
R: dX = 0, dZ = 0
L: dX = 0, dZ = 0
6. If the results are w ithi n tolerance, pr ess the lower button t o save the sett ings.
7. Once savin g the setting s, r em ove the jig nozzles (2AGKNJ001500).
Resolution
Center val ue
Tilt
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-9
FUJI CORPORATION
Adjusting the Current Va lue (Gr ayscale Value) (ADJUSTMENT2)
1. Press the upper button to change to [ADJUSTMENT 2] mode. Press the lower button
to display the current and grayscale values.
2. Press the upper and lower buttons simultaneously to reverse the LCD contrast, and
then check there are no w hit e ar eas within t he gr een rectangles .
3. Block the right-hand glass and check there is no effect on the left-hand area. Blo ck th e
left-hand glass and check there is no e ffect on t he r i ght-han d area.
4. Press the upper and lower buttons simultaneously to set the LCD contrast back to
normal.
Grayscale
values
Current
values
CONFIDENTIAL