NR_WPW_WPC_F3_F4.pdf - 第24页
WPW an SIPLACE 8 0 F3/F4 / WPC on SIPL ACE 80 F3/F4 Nac hrüstanleitung/R etrofitting Ins tructions Aus gabe 09/96 / 09/96 Edition Seite/ Page 12 von/ of 12 • Sav e t he conf i gurat ion f il e. • Sw i tch t o the dat a m…
Nachrüstanleitung/Retrofitting Instructions WPW an SIPLACE 80F3/F4 / WPC on SIPLACE 80F3/F4
Ausgabe 09/96 / 09/96 Edition
Seite/Page 11 von/of 12
\ SP1_Marke1_Pos_x_ist \ 426500,
\ SP1_Marke1_Pos_y_ist \ 491000,
\ SP1_Marke2_Pos_x_ist \ 0,
\ SP1_Marke2_Pos_y_ist \ 0,
\ SP2_Marke1_Pos_x_ist \
,
\ SP2_Marke1_Pos_y_ist \ ,
\ SP2_Marke2_Pos_x_ist \ ,
\ SP2_Marke2_Pos_y_ist \ ,
\ SP3_Marke1_Pos_x_ist \ 778670,
\ SP3_Marke1_Pos_y_ist \ 1304473,
\ SP3_Marke2_Pos_x_ist \ 178348,
\ SP3_Marke2_Pos_y_ist \ 1304505,
This is merely . The values shown in bold and italics must be measured.
•
Save the modified machine data and remove the DOS diskette.
•
Open the Siplace 80F configuration editor.
•
Delete the component set in conveying area 1.
•
Set the desired wafflepack changer carriages in conveying area 1. for the
WPC 80F/3 wafflepack changer.
•
Configure conveying area 2 ( .
• Set the settable component in conveying area 2.
Conveying area fiducial for WPC
Fixed position, may not be changed
Conveying area fiducial 80 F
half setting range tracks 61 to 120
Conveying area fiducial 80 S
Complete setting range
WPW an SIPLACE 80 F3/F4 / WPC on SIPLACE 80 F3/F4 Nachrüstanleitung/Retrofitting Instructions
Ausgabe 09/96 / 09/96 Edition
Seite/Page 12 von/of 12
•
Save the configuration file.
•
Switch to the data manager and translate the configuration file .
•
Check the error message file
•
Start the consistency check for all setups already present.
•
Check the consistency check error message files
•
Use the UNIX line computer operating instructions in order to create the individual wafflepack
magazines for the wafflepack changer.
3RVVLEOHHUURUV
−
Wafflepack changer fiducial not found
⇒
Wafflepack changer not aligned correctly
(field of view of PCB camera).
−
Component not picked up
⇒
Wrong X or Y coordinates of wafflepack magazine
−
Pick-up position too high/low
⇒
Wrong Z position of wafflepack magazine