Specification SIPLACE CS-Speed.pdf - 第10页
8 Description On SIPLACE CS the in-line c on- veyor syst em gu arant ees a quick adjustment to new PC B widths. The change i s made either at the station computer using the men u function or from the line computer via th…
7
Description
A nozzle changer corresponding to
the Collect & Place Head in use
can be installed to the left of the
PCB conveyor with no loss of
feeder capacity. It will change the
nozzle set-up of the placement
head quickly and reliably for the
specific nozzle configuration valid
to a job. Damaged or faulty nozzles
can be exchanged via the menu
function on the station computer.
Placement Heads:
Nozzle Changer
Technical Data
6-Nozzle Collect & Place Head
Type of nozzle All standard nozzles of nozzle series 7xx/9xx
(special nozzles must be tested individually)
Capacity 5 magazines, each with 6 nozzles of one
nozzle series
Nozzle changing times About 2 s per nozzle
Position of Nozzle Changers
Component
Feeders for
Collect & Place
Head
PCB
Nozzle Changer for 6-Nozzle Collect & Place Head
(5 Magazines, each with 6 Nozzles, Option)
Component
Feeders for
Collect & Place
Head
8
Description
On SIPLACE CS the in-line con-
veyor system guarantees a quick
adjustment to new PCB widths.
The change is made either at the
station computer using the menu
function or from the line computer
via the automatic width adjust-
ment unit.
The conveyor can be ordered with
a fixed rail on right or left.
PCB Conveyor
PCB Conveyor
PCB
Transport Direction
Technical Data
PCB dimensions See table on page 3
PCB thickness 0.5 to 4.5 mm
Max. PCB weight 3 kg
Max. PCB warpage Top: 4.5 mm - PCB thickness
Bottom: 0.5 mm + PCB thickness
Free space on PCB bottom side Standard: 25 mm,
Option: max. 40 mm
PCB conveyor height
830
± 15 mm (Standard)
900
± 15 mm (Option)
930
± 15 mm (Option)
950
± 15 mm (Option) SMEMA
Fixed conveyor edge Right (standard), left (option)
Type of interface Siemens (standard); SMEMA (option)
Component-free PCB
handling edge 3 mm
PCB loading time 2.5 s
9
Description
Each side of the machine is
equipped with a changeover table.
The component feeders are sta-
tionary during the placement proc-
ess, therefore it is possible to refill
components or splice tapes with-
out stopping the machine.
Either individual feeders or the en-
tire changeover table can be ex-
changed during changeover.
Use of component bar codes with
the aid of an optional component
bar code scanner guarantees the
correct assignment of the compo-
nent to the track.
To make full use of the advantages
of the component changeover ta-
ble, the entire set-up including the
check can also be conducted out-
side the machine at the optional
SIPLACE set-up station. The
changeover tables are equipped
with rollers and have an integrated
pneumatic lifting device, eliminat-
ing the need for a lifting device.
Exchanging the tables takes less
than 2 minutes per module.
Component Supply:
Changeover Table
Technical Data
Insert (exchangeable) In all SIPLACE placement modules
Feeder locations 59 x 8 mm tracks per table,
118 x 8 mm tracks per machine
Feeder modules SIPLACE feeders for tapes,
stick magazines, Bulk Cases
Accessories Tape container, waste container, tape cutter
Splicing Tool
Mobile Changeover Table
Feeder Table
Centering Position
Compressed Air
Feeder Connection
Reel Container
Reject Bin
Exchange of a Feeder Changeover Table