Specification SIPLACE CS-Speed.pdf - 第12页

10 Description The tape reels of the feeder modules are housed in th e tape container of the component change-over table. A c utter auto- matically chop s up empty tape coming out of the tap e container. Feeders used on …

Description

Each side of the machine is

equipped with a changeover table.

The component feeders are sta-

tionary during the placement proc-

ess, therefore it is possible to refill

components or splice tapes with-

out stopping the machine.

Either individual feeders or the en-

tire changeover table can be ex-

changed during changeover.

Use of component bar codes with

the aid of an optional component

bar code scanner guarantees the

correct assignment of the compo-

nent to the track.

To make full use of the advantages

of the component changeover ta-

ble, the entire set-up including the

check can also be conducted out-

side the machine at the optional

SIPLACE set-up station. The

changeover tables are equipped

with rollers and have an integrated

pneumatic lifting device, eliminat-

ing the need for a lifting device.

Exchanging the tables takes less

than 2 minutes per module.

Component Supply:

Changeover Table

Technical Data

Insert (exchangeable) In all SIPLACE placement modules

Feeder locations 59 x 8 mm tracks per table,

118 x 8 mm tracks per machine

Feeder modules SIPLACE feeders for tapes,

stick magazines, Bulk Cases

Accessories Tape container, waste container, tape cutter

Splicing Tool

Mobile Changeover Table

Feeder Table

Centering Position

Compressed Air

Feeder Connection

Reel Container

Reject Bin

Exchange of a Feeder Changeover Table

Description

The tape reels of the feeder

modules are housed in the tape

container of the component

change-over table. A cutter auto-

matically chops up empty tape

coming out of the tape container.

Feeders used on SIPLACE are

distinguished by a short cycle

time and a high-precision pick-up

position. Even product diversity

and small batch sizes can be

handled easily since the feeder

set-up can be changed quickly.

The increment of the tape cycle is

just as variable as the use of tape

materials. Thanks to the general

purpose tape feeding modules

which are equally suitable for pa-

per and blister tapes, a small range

of module types will be sufficient.

Activated by a signal from the

component table, the modules

control the entire feeder sequence

themselves, including the auto-

matic take-up of the strips.

The S Feeders series feature

shorter cycle times and they

can handle tapes with 2 mm

grids (8 mm S). 8 mm S and

12/16 mm S are equipped with

component cover.

The feeders can be used in other

SIPLACE machines as well.

Component Supply:

Tape Feeder

Technical Data

Packaging Model Feeder

locations

Transport

distance

Max. Height

of component

Paper and

blister tapes

2 x 8 mm S

3 x 8 mm S

12/16 mm S

2 or 4 mm

2 mm

4 - 12 mm

2.5 mm

0.7 mm

14 mm

Blister tape 24/32 mm S 1.5 4 - 32 mm

14 mm

Tape reels Ø 7" to 19" (178 - 475 mm)

Feeder cycle S-feeder to 20 mm transport distance < 150 ms

a) Fiducial for recognition of position of feeders;

b) only for 0201 and 0402;

c) adjustable in increments of 4 mm.

Tape Feeder Modules S

24 / 32 mm S

12 / 16 mm S

3 x 8 mm S

2 x 8 mm S

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

components packaged in standard

bulk containers. It transports rec-

tangular and cylindrical passive

components to the pick up area of

the machine. To replenish the

supply, the Bulk Cases are re-

moved and replaced outside the

machine eliminating stoppages for

replenishment.

Essentially, this feeder module

consists of a base which holds 2

feeder rails. The components are

separated and transported through

the feeder rail via compressed air.

The principle of stationary compo-

nent tables has been tried and

tested specifically with Bulk Case

components. Vibrations, which

developed when other placement

methods are used may cause

wear to the components compro-

mising quality and reliability of the

components.

The stationary component table

also brings decisive advantages for

stick magazines. The general pur-

pose vibratory stick feeder can be

refilled during the placement proc-

ess.

The feeders can be used in other

SIPLACE machines as well.

Component Supply:

Bulk Case Feeder

Stick Magazine Feeder

Technical Data

Bulk Case feeder

Type of packaging

Bulk Case

Feeder rails for Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different

component types

Stick magazine feeder Type III With control electronics

Number and width of tracks 3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1

a) Fiducial to recognize position of feeder.

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Feeder

Type III